Thingiverse
Stanley Pro 25 organizer shelf system by NUKEGREEN
by Thingiverse
Last crawled date: 5 years, 8 months ago
Hi,
This is a shelf system based on guide rails and M8-threaded rods with nuts. In this particular setup it is optimized for a ELFA shelf system. I used a milling machine and 6 mm thick acrylic plastic. I think laser cutting (DXF) or even 3D-printing (STL) would work great!
Good luck,
NUKEGREEN
For more picture and a short summary (in Swedish) please see:https://www.sweclockers.com/galleri/15135-hyllsystem-stanley-pro-25
This is a shelf system based on guide rails and M8-threaded rods with nuts. In this particular setup it is optimized for a ELFA shelf system. I used a milling machine and 6 mm thick acrylic plastic. I think laser cutting (DXF) or even 3D-printing (STL) would work great!
Good luck,
NUKEGREEN
For more picture and a short summary (in Swedish) please see:https://www.sweclockers.com/galleri/15135-hyllsystem-stanley-pro-25