Thingiverse
Stacking stand for bottles 5ml / 10ml by ekatarios
by Thingiverse
Last crawled date: 4 years, 1 month ago
Stacking stand for 5 and 10 ml bottles.
Each stand consists of 3 parts:
base (with holes; diameter - 22 mm),
bottom,
stand (different for 5 / 10 ml stands; version 10 ml is higher by 11 mm).
This model was created for SBS filament (or Bestfilament Watson). But, I think, you can print it using another material with good adhesion between layers.
Each stand consists of 3 parts:
base (with holes; diameter - 22 mm),
bottom,
stand (different for 5 / 10 ml stands; version 10 ml is higher by 11 mm).
This model was created for SBS filament (or Bestfilament Watson). But, I think, you can print it using another material with good adhesion between layers.