Thingiverse
![Spyda Multiwii / Megapirate Crius GPS / Flight controller / Bluetooth mounting case anti-vibration by danman1178](/previews/8904243.jpg)
Spyda Multiwii / Megapirate Crius GPS / Flight controller / Bluetooth mounting case anti-vibration by danman1178
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a carriage that holds the GPS Flight controller and Bluetooth for the SPYDA quad copter. I have also included the modified top body part to line up with the anti-vibration balls. Modified from the model named Crius AIOP v2.0 - UBLox CN-06 - bluetooth - HobbyKing 3dr radio. uses antivibration for larger gimbals.
Similar models
thingiverse
free
![SP Racing F3 anti-vibration mount for Spyda 500 by aalbinger](/t/8804381.jpg)
SP Racing F3 anti-vibration mount for Spyda 500 by aalbinger
... flight controller (or any other fc that uses 30.5 hole spacing like the naze32) on a spyda-500 plate using anti-vibration balls.
grabcad
free
![3D Printed quadrocopter frame](/t/1742492.jpg)
3D Printed quadrocopter frame
....0 flight controller (50x50mm). m3 screw holes 45x45mm.
additional board for crius gps, to be placed over the flight controller.
grabcad
free
![Crius NEO-6 GPS Module v3](/t/1731575.jpg)
Crius NEO-6 GPS Module v3
...odule v3
grabcad
this model was referenced to make its mounting plate. board size is different than the crius flight controller.
grabcad
free
![M2 Silicon Damper Flight Controller](/t/13177104.jpg)
M2 Silicon Damper Flight Controller
...damper flight controller
grabcad
specs:
https://www.amazon.com/flight-controller-vibration-dampener-anti-vibration/dp/b0b5xcxq27
grabcad
free
![Anti-vibration Mount](/t/5354261.jpg)
Anti-vibration Mount
...
this is a model of an anti-vibration mount for flight controllers. this will be very helpful when someone models a multi copter.
thingiverse
free
![Omnimac OP CC3D And Revo Anti Vibration Mount by GuyMcCaldin](/t/9020824.jpg)
Omnimac OP CC3D And Revo Anti Vibration Mount by GuyMcCaldin
...d revo anti vibration mount by guymccaldin
thingiverse
anti vibration mount for the open pilot cc3d and revo flight controllers.
thingiverse
free
![APM Anti Vibration Mount from the CD by baksser](/t/8728557.jpg)
APM Anti Vibration Mount from the CD by baksser
...se
apm anti vibration mount from the cd
anti-vibration mount for the apm 2.5 / 2.6 flight controllers.
fastening on a frame 450.
thingiverse
free
![Mini Talon Anti-Vibration Flight Controller Tray (Short version) by StuntDouble](/t/8673542.jpg)
Mini Talon Anti-Vibration Flight Controller Tray (Short version) by StuntDouble
... bottom to the top. the tray has been designed to fit an apm or vector flight controller, other flight controllers will also fit.
grabcad
free
![Anti-vibration mount for Tarot680pro frame](/t/1735028.jpg)
Anti-vibration mount for Tarot680pro frame
... tarot680pro frame
grabcad
3d printable anti-vibration mount for tarot 680 pro frame and flight controllers (pixhawk, apm, etc.)
thingiverse
free
![Mini Talon Anti-Vibration Flight Controller Tray (Long version) by StuntDouble](/t/8673538.jpg)
Mini Talon Anti-Vibration Flight Controller Tray (Long version) by StuntDouble
... bottom to the top. the tray has been designed to fit an apm or vector flight controller, other flight controllers will also fit.
Megapirate
grabcad
free
![Multiwii & Megapirate 2560 v2 - Boitier (Box)](/t/1632798.jpg)
Multiwii & Megapirate 2560 v2 - Boitier (Box)
...mensions: 53x53x13mm
weight: 11.3g
includes:
double sided foam mounting tape
self-tapping case screws
product id: 9387000033-0
grabcad
free
![Multiwii & Megapirate 2560 v2](/t/1886486.jpg)
Multiwii & Megapirate 2560 v2
...
1 x molex 1.25mm 4pin cable 100mm
1 x molex 1.25mm 6pin cable 100mm
1 x molex 1.25mm 8pin cable 100mm
product id: 387000007
grabcad
free
![QUADRICOPTERO DRONE BBS555](/t/5137570.jpg)
QUADRICOPTERO DRONE BBS555
...no autodesk inventor professional 2015 componentes: 1) multiwii and megapirate aio flight controller w/ftdi (atmega 2560) v2.0 2) arduino...
3dwarehouse
free
![X-Quad](/t/9090349.jpg)
X-Quad
...4 x turnigy plush 18amp speed controller -- http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=4312; #megapirate ...
Danman1178
thingiverse
free
![Small Shelf by danman1178](/t/8991892.jpg)
Small Shelf by danman1178
...luetooth speaker. this works great with my speaker... i'm sure you could put whatever you want on it. sketchup file included.
thingiverse
free
![SPYDA DJI Arm with no feet by danman1178](/t/8902686.jpg)
SPYDA DJI Arm with no feet by danman1178
...n1178
thingiverse
spyda dji arm with no feet for when you gots other feets...
credit to the spyda guys for this base object..
thingiverse
free
![T 800 Terminator without the circle middle by danman1178](/t/8964957.jpg)
T 800 Terminator without the circle middle by danman1178
...cle middle by danman1178
thingiverse
this will save you filament if you intend to only print the outer-shell with no infill....
thingiverse
free
![500 SPYDA camera mount with mounting holes by danman1178](/t/8929493.jpg)
500 SPYDA camera mount with mounting holes by danman1178
...danman1178
thingiverse
put mounting hole on the bottom of the mount so i can screw the mount in under the chassis thru the arms.
thingiverse
free
![USAF Logo'd Galaxy Note 3 Case by danman1178](/t/8964585.jpg)
USAF Logo'd Galaxy Note 3 Case by danman1178
...verse
based off of the this galaxy note 3 case designhttp://www.thingiverse.com/thing:240113/#files
i just added the usaf logo!!
thingiverse
free
![Printrbot Lift Kit by danman1178](/t/8995460.jpg)
Printrbot Lift Kit by danman1178
... off the ground may allow me to move the x axis motor to the middle of the x plate to run in-between the rods instead of the end.
thingiverse
free
![3M parts bin hook mount x2 by danman1178](/t/8792486.jpg)
3M parts bin hook mount x2 by danman1178
...in but it worked out better to have two strips per bin ... then i just linked them together and that seemed to work best.
enjoy.
thingiverse
free
![Easy Print Anti-vibration Rubber Shock Absorber Ball by danman1178](/t/8899910.jpg)
Easy Print Anti-vibration Rubber Shock Absorber Ball by danman1178
... great! they are beveled so that there is no need for support eliminating any overhangs. even with the bevels they fit perfectly.
thingiverse
free
![1405 300m No Sag Bearing Mod by danman1178](/t/8966534.jpg)
1405 300m No Sag Bearing Mod by danman1178
...es and it also actually reduces some of the belt vibration and allows for some belt tensioning as well depending on its rotation.
thingiverse
free
![1405 Simble Filament Feeder / Stabilizer by danman1178](/t/8970030.jpg)
1405 Simble Filament Feeder / Stabilizer by danman1178
... file added, notch added and printrbot logo changed so that it starts printing half way thru not on first layer (better adhesion)
Crius
thingiverse
free
![Case for MultiWII Crius SE by stemeh](/t/8984800.jpg)
Case for MultiWII Crius SE by stemeh
...case for multiwii crius se by stemeh
thingiverse
case for crius se / lite and holes for turnigy receiver
thingiverse
free
![Crius AIOP v1.0 damper stand by omegapraim](/t/8803979.jpg)
Crius AIOP v1.0 damper stand by omegapraim
...crius aiop v1.0 damper stand by omegapraim
thingiverse
crius aiop v1.0 damper stand
thingiverse
free
![Suport GPS Crius APM by rafaelvixfly](/t/8818359.jpg)
Suport GPS Crius APM by rafaelvixfly
...by rafaelvixfly
thingiverse
gps suport for tarot battery plate for gps crius mini users.
making the fixing holes with the drill
thingiverse
free
![Crius AIOP v2 Case by BrainHunter](/t/8910727.jpg)
Crius AIOP v2 Case by BrainHunter
...alkera rx1002.
the rx will sit on top of the case mounted with the clip. the clip should just snap into the top part of the case.
thingiverse
free
![Crius Multiwii SE V2.5 housing by ZiegeOne](/t/8934950.jpg)
Crius Multiwii SE V2.5 housing by ZiegeOne
... ziegeone
thingiverse
crius multiwii se v2.5 housing
dimensions 42x42x9
holes m3
both leds have a hole 3mm
a3 a6 a7 hole
thingiverse
free
![Crius Multiwii AIOP v2 box by zatorax](/t/8930794.jpg)
Crius Multiwii AIOP v2 box by zatorax
...crius multiwii aiop v2 box by zatorax
thingiverse
исходники прилагаются.
sourse inside.
thingiverse
free
![Crius GPS (CN-06) mount for PX4FMU by Gruffy](/t/8996676.jpg)
Crius GPS (CN-06) mount for PX4FMU by Gruffy
... the image, a 3dr-radio is fit between the px4fmu and the crius mount as well, but there are no mounting holes/fixtures for this.
thingiverse
free
![Crius AIOP v2 protective plate by GeoSfak](/t/8927001.jpg)
Crius AIOP v2 protective plate by GeoSfak
...e of my first test designs. a protective plate for my flight controller crius aiop v2 running multiwii firmware on my quadcopter.
thingiverse
free
![Case for Crius GPS module by stevieg](/t/8965206.jpg)
Case for Crius GPS module by stevieg
...taching the module if not using the lid.
if using the lid, the pcb is held in place between the pillars and the skirt of the lid.
thingiverse
free
![Crius NEO-M6 V3 GPS case by Thesquirlmaster](/t/8852677.jpg)
Crius NEO-M6 V3 GPS case by Thesquirlmaster
...ps, the larger one has 2mm clearance around the gps and has bolting holes
i printed it in pla with .3mm layer height and 40% fill
Spyda
thingiverse
free
![SPYDA DJI Arm with no feet by danman1178](/t/8902686.jpg)
SPYDA DJI Arm with no feet by danman1178
...n1178
thingiverse
spyda dji arm with no feet for when you gots other feets...
credit to the spyda guys for this base object..
thingiverse
free
![SPYDA 500 HI THEME by Ranger2](/t/8896650.jpg)
SPYDA 500 HI THEME by Ranger2
...spyda 500 hi theme by ranger2
thingiverse
v2 of the spyda 500 side guards bottom plate
thingiverse
free
![Batterymount for Spyda by Vobo](/t/8954677.jpg)
Batterymount for Spyda by Vobo
...djust the cg of the copter.
at my copter it work´s perfect
printed in pla with support (because oh the long hole for the strap)
thingiverse
free
![Landing gear for quadcopter (Spyda 500) by wallie](/t/8982822.jpg)
Landing gear for quadcopter (Spyda 500) by wallie
...landing gear for quadcopter (spyda 500) by wallie
thingiverse
landing gear for spyda 500 quadcopter, height 35mm..
thingiverse
free
![Mobius mount for spyda 500 by pando85](/t/8904222.jpg)
Mobius mount for spyda 500 by pando85
...se
fast remix from https://www.thingiverse.com/thing:896137 to mount in spyda 500.
2015-08-31 added antivibration holes model.
thingiverse
free
![side guard for the spyda 500 by Ranger2](/t/8896931.jpg)
side guard for the spyda 500 by Ranger2
...ok.
the two halves are attached to the top and bottom plate using ca and separated intentionally to make it easy for maintenance.
thingiverse
free
![Gopro Hero2 gimbal to Spyda 500 mount. by mickeshobby](/t/8998929.jpg)
Gopro Hero2 gimbal to Spyda 500 mount. by mickeshobby
...nt. by mickeshobby
thingiverse
this is the missing piece to mount your 3d printed brushless gimbal on your 3d printed spyda 500.
thingiverse
free
![Spyda 500 Camera Mount by FroggyExact](/t/8274058.jpg)
Spyda 500 Camera Mount by FroggyExact
...ounting in front, the other is for mounting under.
a countersunk/flush screw and a stabilizer are use for fastening the gear 360.
thingiverse
free
![Spyda 500 crossfire landing strut by Dcdesigns](/t/8986435.jpg)
Spyda 500 crossfire landing strut by Dcdesigns
... did not like the landing gear on the spyda 500 quad so i made my own. it mounts to the bottom of the frame where the arms mount.
thingiverse
free
![Spyda 500 Base Redising by wifixcort](/t/8911982.jpg)
Spyda 500 Base Redising by wifixcort
...ple reason that i don't like the original.
you can find all original design here:
http://www.thingiverse.com/thing:160607
Multiwii
thingiverse
free
![F450 MultiWii case by buber](/t/8817929.jpg)
F450 MultiWii case by buber
...f450 multiwii case by buber
thingiverse
multiwii 2.5 2.6 protection box
thingiverse
free
![Multiwii SE Protective Case by Mindfab](/t/9001659.jpg)
Multiwii SE Protective Case by Mindfab
...on m3 screws, the multiwii itself is also secured with screws.
the multiwii dimensions are 4040 mm, the srew spacing is 3535mm.
thingiverse
free
![MultiWii Flight Controller Adapter by meehantp](/t/8910909.jpg)
MultiWii Flight Controller Adapter by meehantp
...rse
adapter to mount hobbyking multiwii board in place of a crius multiwii (hobbyking is about 10mm bigger on the x and y axis).
thingiverse
free
![Box for MultiWii Mega by Peter_Reinhardt](/t/8954692.jpg)
Box for MultiWii Mega by Peter_Reinhardt
...ox for the multiwii mega flight controller board. to cover the baro (small hole in the top cover) use foam for coverage!
enjoy!
thingiverse
free
![MultiWii PRO 2.0 case by Marianoooo](/t/9005787.jpg)
MultiWii PRO 2.0 case by Marianoooo
...multiwii pro 2.0 case by marianoooo
thingiverse
multiwii pro 2.0 case with three pin right angle installed on top.
thingiverse
free
![Multiwii GPS + Compass Case by TAGE_FPV](/t/8808679.jpg)
Multiwii GPS + Compass Case by TAGE_FPV
...neric gps case with a slot and space for compass unit.
perfect for neo 6 series gps and compass units for multiwii and the likes.
thingiverse
free
![Housing for Hobby King Multiwii and 9ch reciever by mattshane](/t/9015405.jpg)
Housing for Hobby King Multiwii and 9ch reciever by mattshane
...housing for hobby king multiwii and 9ch reciever by mattshane
thingiverse
small box for hobbyking multiwii pro
thingiverse
free
![MultiWii SE V3.0 holder for F450 F550 by LEXX](/t/8947469.jpg)
MultiWii SE V3.0 holder for F450 F550 by LEXX
...multiwii se v3.0 holder for f450 f550 by lexx
thingiverse
multiwii se v3.0 holder for f450 f550
thingiverse
free
![Multiwii V2.5 case by galiettd](/t/8909439.jpg)
Multiwii V2.5 case by galiettd
...fit the multiwii 2.5.
fits like a glove with room to make connections and have a small foam pad under the wii to absorb shocks.
thingiverse
free
![MultiWii adapter for H250 FPV quad by Phil_Maddox](/t/8952039.jpg)
MultiWii adapter for H250 FPV quad by Phil_Maddox
...er are for screws to the frame and the multiwii is then attached with gyro/foam tape.
if you like this thing ....hit the button
Bluetooth
3d_ocean
$16
![Bluetooth handset](/t/573566.jpg)
Bluetooth handset
...ooth handset
3docean
bluetooth bluetooth handset concept handset headphone high poly modern music new
high poly bluetooth handset
turbosquid
$35
![Bluetooth](/t/13519109.jpg)
Bluetooth
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
![USB-Bluetooth](/t/629135.jpg)
USB-Bluetooth
...luetooth
3ddd
bluetooth
usb-bluetooth с прозрачным корпусом. камера и освещение выставлены. камера проанимирована на презентацию.
3d_export
$5
![bluetooth card](/t/11419481.jpg)
bluetooth card
...bluetooth card
3dexport
this is a simplified bluetooth card with which you can create cases
turbosquid
$2
![Bluetooth Speaker](/t/13293114.jpg)
Bluetooth Speaker
...royalty free 3d model bluetooth speaker for download as blend on turbosquid: 3d models for games, architecture, videos. (1281743)
turbosquid
$5
![Bluetooth Speaker](/t/13315735.jpg)
Bluetooth Speaker
...y free 3d model bluetooth speaker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1336601)
turbosquid
$5
![Bluetooth Speaker](/t/13315736.jpg)
Bluetooth Speaker
...y free 3d model bluetooth speaker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1336600)
turbosquid
$5
![Bluetooth Speaker](/t/13315737.jpg)
Bluetooth Speaker
...y free 3d model bluetooth speaker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1336599)
turbosquid
$3
![Bluetooth speaker](/t/13239003.jpg)
Bluetooth speaker
...y free 3d model bluetooth speaker for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1165662)
turbosquid
$19
![Bluetooth Speaker](/t/13476575.jpg)
Bluetooth Speaker
...odel bluetooth speaker for download as max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1286177)
Vibration
design_connected
$16
![Vibration Rug](/t/7936975.jpg)
Vibration Rug
...vibration rug
designconnected
ligne roset vibration rug computer generated 3d model. designed by tordjman, vincent.
3d_export
$15
![20 sets of vibrating plate direct vibration feeding mechanism](/t/11888033.jpg)
20 sets of vibrating plate direct vibration feeding mechanism
...oading and distribution structure of oil nozzle vibration plate, bearing vibration plate and conveyor belt distribution structure
turbosquid
$35
![Vibrating Reed](/t/13382719.jpg)
Vibrating Reed
...alty free 3d model vibrating reed for download as 3ds and fbx on turbosquid: 3d models for games, architecture, videos. (1197281)
turbosquid
$5
![Vibrating conveyor,](/t/13523045.jpg)
Vibrating conveyor,
...model vibrating conveyor, for download as ige, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1227258)
3d_export
$5
![sorting-machine-vibrating-feeder](/t/11888302.jpg)
sorting-machine-vibrating-feeder
...sorting-machine-vibrating-feeder
3dexport
a simple and applicable sorting machine vibrating feeder model.
turbosquid
$9
![Vibration polishing module](/t/13523071.jpg)
Vibration polishing module
...olishing module for download as 3ds, ige, obj, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1224249)
3d_export
$19
![Full set of vibrating screen exciter](/t/12783194.jpg)
Full set of vibrating screen exciter
...g, eccentric shaft drawing, balance wheel drawing, shaft cover flange drawing, etc. 30 drawings, welcome to download and produce!
3d_export
$7
![vibrating screening magnetic separation system](/t/11888036.jpg)
vibrating screening magnetic separation system
...vibrating screening magnetic separation system
3dexport
vibrating screening magnetic separation system
3d_export
$18
![Penis shaped Vibrator 3D Model](/t/206633.jpg)
Penis shaped Vibrator 3D Model
...ed vibrator 3d model
3dexport
penis dick vibrator toy sex genital porno porn
penis shaped vibrator 3d model scyrus 85666 3dexport
turbosquid
free
![Vibrating plate feeding mechanism](/t/13522926.jpg)
Vibrating plate feeding mechanism
...brating plate feeding mechanism for download as sldas and ige on turbosquid: 3d models for games, architecture, videos. (1655940)
Anti
3d_export
$5
![Anti stress kit](/t/12006129.jpg)
Anti stress kit
...anti stress kit
3dexport
anti stress kit wall sign
turbosquid
$5
![Anti-aircraft](/t/13292543.jpg)
Anti-aircraft
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![Anti stapler 3D Model](/t/126965.jpg)
Anti stapler 3D Model
...anti stapler 3d model
3dexport
staples anti stapler анти степлер
anti stapler 3d model seemoonlight 69602 3dexport
archive3d
free
![Anti-aircraft 3D Model](/t/1052480.jpg)
Anti-aircraft 3D Model
...litary equipment
anti-aircraft m730a1 n020711 - 3d model (*.3ds) for exterior 3d visualization.
3d_export
$5
![anti-vandal unit nofer](/t/11522000.jpg)
anti-vandal unit nofer
...anti-vandal unit nofer
3dexport
anti-vandal unit nofer
turbosquid
$30
![Anti-tank Obstacle](/t/13486149.jpg)
Anti-tank Obstacle
...
royalty free 3d model anti-tank obstacle for download as fbx on turbosquid: 3d models for games, architecture, videos. (1438196)
turbosquid
$3
![Anti gravity drone](/t/13291911.jpg)
Anti gravity drone
...
royalty free 3d model anti gravity drone for download as obj on turbosquid: 3d models for games, architecture, videos. (1311361)
turbosquid
$1
![Anti airplane Missile](/t/13281443.jpg)
Anti airplane Missile
...yalty free 3d model anti airplane missile for download as fbx on turbosquid: 3d models for games, architecture, videos. (1274540)
turbosquid
$1
![Anti-Terrorist Barrier](/t/13279578.jpg)
Anti-Terrorist Barrier
...e 3d model anti-terrorist barrier for download as jpg and obj on turbosquid: 3d models for games, architecture, videos. (1348463)
3d_ocean
$8
![Sunsilk Anti Dandruff](/t/368753.jpg)
Sunsilk Anti Dandruff
...i dandruff sunsilk bottle sunsilk pack sunsilk product sunsilk shampoo
sunsilk anti dandruff is sunsilk shampoo 3d model product.
Gps
3ddd
free
![Подавитель GPS](/t/719764.jpg)
Подавитель GPS
...подавитель gps
3ddd
подавитель gps
3ddd
free
![Подавитель GPS](/t/719341.jpg)
Подавитель GPS
...подавитель gps
3ddd
подавитель gps
3ddd
free
![Cтол GP](/t/705435.jpg)
Cтол GP
...cтол gp
3ddd
обеденный , giorgio piotto
cтол gp
turbosquid
$5
![GPS navigation](/t/13362806.jpg)
GPS navigation
...e 3d model gps navigation for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1636695)
turbosquid
$4
![GP-5](/t/13387705.jpg)
GP-5
...lty free 3d model gp-5 for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1160699)
turbosquid
$60
![TomTom GPS](/t/13291180.jpg)
TomTom GPS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![GPS/TV](/t/13259961.jpg)
GPS/TV
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![Battery GP 3D Model](/t/139372.jpg)
Battery GP 3D Model
...battery gp 3d model
3dexport
battery gp
battery gp 3d model wasiliy 40319 3dexport
3d_export
$5
![gas mask gp-5](/t/11445465.jpg)
gas mask gp-5
...gas mask gp-5
3dexport
gas mask gp-5
cg_studio
$36
![Gps device3d model](/t/633185.jpg)
Gps device3d model
...ice3d model
cgstudio
.3ds .c4d .dxf .obj - gps device 3d model, royalty free license available, instant download after purchase.
Flight
3d_export
$5
![flight case](/t/11928646.jpg)
flight case
...flight case
3dexport
flight case
3ddd
$1
![Zgallerie / Flight](/t/865542.jpg)
Zgallerie / Flight
...zgallerie / flight
3ddd
profi.кофейный , zgallerie
кофейный столик flight, zgallerie
archibase_planet
free
![Flight suit](/t/952619.jpg)
Flight suit
...archibase planet
flight suit clothing clothes
flight suit 2005-v3 n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
![Flight](/t/916488.jpg)
Flight
... zgallerie , приставной
приставной столик фирмы zgallerie
turbosquid
$19
![Flight Recorder](/t/13519339.jpg)
Flight Recorder
...ee 3d model flight recorder for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1264654)
3ddd
$1
![Flight Nicoletti Home](/t/914991.jpg)
Flight Nicoletti Home
...flight nicoletti home
3ddd
nicoletti home , угловой
flight nicoletti home
turbosquid
$29
![Flight of stairs](/t/13390433.jpg)
Flight of stairs
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
![Flight Hunter](/t/13509136.jpg)
Flight Hunter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
![Flight Cases](/t/13482574.jpg)
Flight Cases
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$13
![Flight case](/t/13408409.jpg)
Flight case
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Controller
3d_ocean
$4
![Controller TQFP32](/t/568137.jpg)
Controller TQFP32
...qfp32
3docean
chip controller cpu electronic gpu mcu micro controller silicon smd tqfp wafer
a micro controller in tqfp32 package
3d_ocean
$4
![Controller TQFP44](/t/582452.jpg)
Controller TQFP44
...44
3docean
chip controller cpu electronic gpu mcu micro controller package smd tqfp tqfp44
a micro controller in a tqfp44 package
3d_export
$15
![control unit](/t/11461536.jpg)
control unit
...control unit
3dexport
control unit
3ddd
$1
![Yacht control](/t/607399.jpg)
Yacht control
...yacht control
3ddd
yacht control
3d_export
$5
![controle pgdm](/t/11459901.jpg)
controle pgdm
...controle pgdm
3dexport
carcaca controle pgdm
turbosquid
free
![controler](/t/13261168.jpg)
controler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![Control](/t/865442.jpg)
Control
...
http://www.schmitz-leuchten.de/html-ru/einzelleuchten-lampentyp-details.php?lamptype_no=700&group;=917&id;=731
3d_ocean
$4
![Controller TQFP100](/t/569704.jpg)
Controller TQFP100
...100
3docean
chip computer cpu electronic gpu mcu micro controller pin platine silicon wafer
a micro controller in tqfp100 package
3d_ocean
$4
![Controller TQFP64](/t/585960.jpg)
Controller TQFP64
...qfp64
3docean
chip computer cpu gpu mcu micro controller package silicon tqfp tqfp64 wafer
a micro controller in a tqfp64 package
3d_ocean
$7
![Remote controller](/t/565540.jpg)
Remote controller
... control switcher tv remote
remote controller for tv, sound systems etc easy to edit textures photo real rendered with mental ray
Case
3d_export
$1
![case](/t/11426443.jpg)
case
...case
3dexport
case
archibase_planet
free
![Case](/t/948749.jpg)
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/948750.jpg)
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/951666.jpg)
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/946639.jpg)
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/949378.jpg)
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/949761.jpg)
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
![Case](/t/950554.jpg)
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Case](/t/950556.jpg)
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Case](/t/948218.jpg)
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Mounting
3d_export
free
![mounting bracket](/t/11930644.jpg)
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
![MOUNTING](/t/13297806.jpg)
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Mounts](/t/13301538.jpg)
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Mount Fuji](/t/13283919.jpg)
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
![Headphone mount LR](/t/13049709.jpg)
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
![Mount rainier](/t/13389641.jpg)
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
![pipe mounting](/t/13242068.jpg)
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
![Mounting Tires](/t/13457386.jpg)
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
![Magnetic GoPro Mount](/t/11385909.jpg)
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
![Stone Mount](/t/13279026.jpg)
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)