Thingiverse
Spyda 500 Quadcopter With Customization by LostMann
by Thingiverse
Last crawled date: 4 years, 7 months ago
First of all i am not the creator of this model. I just made customization for my self.
History:
2018/03/20-- Maiden flight, 13 min flight time.
Flight Videos:
--https://youtu.be/2YE-ok4Xs9g
What is differences vs the original? :
-- On the top and bottom body plate, i put holes for gimbal mount and flight controller box.-- On the top body and bottom body plate, i made a wall for putting the battery inside it. Max battery size 147 x 49 x 33mm, i used Turnigy 4s 5000mah 25c-35c lipo battery-- I added DJI Naza flight controller boxes for flight controller, gps, pmu and for led-usb connection.-- I made a gimbal for my 2805 motors, mount hole size 19mm and front hole size 12mm.-- I found a hood and changed the size for my frame.-- Also if you have a plan for using power distribution board, you can use Body Bottom Part (deeper) over the original bottom body plate. So you can put board and cables inside this 3 part of the body.
My Electronics:
-- Emax MT3110 700kv motors-- 11x47 or 12x45 propellers-- Emax 4 in 1 30 ESC-- Turnight 4s 5000 Mah 25C or Multistar 4s 5000mah 10C lipo-- Hollow Shaft 2805 noname Chinese edition gimbal motor
Tinkercad Project:
https://www.tinkercad.com/things/kQGLzjeR1vx
History:
2018/03/20-- Maiden flight, 13 min flight time.
Flight Videos:
--https://youtu.be/2YE-ok4Xs9g
What is differences vs the original? :
-- On the top and bottom body plate, i put holes for gimbal mount and flight controller box.-- On the top body and bottom body plate, i made a wall for putting the battery inside it. Max battery size 147 x 49 x 33mm, i used Turnigy 4s 5000mah 25c-35c lipo battery-- I added DJI Naza flight controller boxes for flight controller, gps, pmu and for led-usb connection.-- I made a gimbal for my 2805 motors, mount hole size 19mm and front hole size 12mm.-- I found a hood and changed the size for my frame.-- Also if you have a plan for using power distribution board, you can use Body Bottom Part (deeper) over the original bottom body plate. So you can put board and cables inside this 3 part of the body.
My Electronics:
-- Emax MT3110 700kv motors-- 11x47 or 12x45 propellers-- Emax 4 in 1 30 ESC-- Turnight 4s 5000 Mah 25C or Multistar 4s 5000mah 10C lipo-- Hollow Shaft 2805 noname Chinese edition gimbal motor
Tinkercad Project:
https://www.tinkercad.com/things/kQGLzjeR1vx