Spun Aluminum Internal Beadlock Wheel

Last crawled date: 1 year, 11 months ago

This is a wheel design I developed for a UTV. I needed room for larger brakes and huge travel while maintaining pressure on the bead to prevent the tires slipping on the wheel especially at low pressure. IT is a 15" wheel that is 8 1/4" wide with a 2" offset and a 137mm 4 lug bolt pattern. The internal ring could be 3D printed from PLA with 3 outer layers and 30% infill. The outer wheel part is meant to be A356 cast aluminum and the inner rim is meant to be Spun 6061 aluminum.

Thanks to Per Hassel Sørensen for his air valve that I modified a bit to fit this design:
https://grabcad.com/library/bicycle-air-valve-schrader-1

And to Pavel for the Yokohama Geolander tire that i modified a little as well for this:
https://grabcad.com/library/mud-terrain-tyre-and-rim-wheel-1

And of course to the ever-awesome McMaster for the hardware.