Thingiverse
Spring-loaded Replicator 1 Drive Block - Modified Lever by gyronictonic
by Thingiverse
Last crawled date: 4 years, 7 months ago
Derivation of the "Spring-loaded Replicator 2 Drive Block" by Makerbot
Modified the MBE Lever to use a M3 x 8mm screw to hold the 623ZZ bearing. This was done because I had an issue printing the bearing bolt stub, either being too weak to hold the bearing or over-sized and unable to push-fit the bearing in.
This is the main extruder used for my RepRap 3DPrinter, 3DPrintMihttp://www.thingiverse.com/thing:95339
Parts:
1 x Compression Spring, 1.00" Long,.375" OD,.035" Wirehttp://www.mcmaster.com/#9657k306/=10gvnbp
1 x M3 x 4mmhttp://www.mcmaster.com/#92010A112
1 x M3 x 16mmhttp://www.mcmaster.com/#91420A126
1 x 623Z Bearinghttp://www.robotdigg.com/product/62/623ZZ-Ball-Bearing
Modified the MBE Lever to use a M3 x 8mm screw to hold the 623ZZ bearing. This was done because I had an issue printing the bearing bolt stub, either being too weak to hold the bearing or over-sized and unable to push-fit the bearing in.
This is the main extruder used for my RepRap 3DPrinter, 3DPrintMihttp://www.thingiverse.com/thing:95339
Parts:
1 x Compression Spring, 1.00" Long,.375" OD,.035" Wirehttp://www.mcmaster.com/#9657k306/=10gvnbp
1 x M3 x 4mmhttp://www.mcmaster.com/#92010A112
1 x M3 x 16mmhttp://www.mcmaster.com/#91420A126
1 x 623Z Bearinghttp://www.robotdigg.com/product/62/623ZZ-Ball-Bearing