Thingiverse
Spring filament guide by I_Christian_I
by Thingiverse
Last crawled date: 4 years, 6 months ago
Hi, I had an idea for a different filament guide...
It can be used if you have an external filament holder (I haven't got one yet).
The spring can be found by searching for:
"Cord Management for Roller Shutter/Roller Shutter Cord"
or "Line Guide for Roller Shutters with Upper Deflection and Cord"https://www.amazon.de/-/en/Guide-Roller-Shutters-Deflection-Spring/dp/B00TM0QGIO/
The spring I used has a diameter of 9,9mm and is 250mm long.
The advantage is that the spring pre tensions the filament the whole time which should work like a "filament buffer".
I splitted the part for easier printing.
It can be used if you have an external filament holder (I haven't got one yet).
The spring can be found by searching for:
"Cord Management for Roller Shutter/Roller Shutter Cord"
or "Line Guide for Roller Shutters with Upper Deflection and Cord"https://www.amazon.de/-/en/Guide-Roller-Shutters-Deflection-Spring/dp/B00TM0QGIO/
The spring I used has a diameter of 9,9mm and is 250mm long.
The advantage is that the spring pre tensions the filament the whole time which should work like a "filament buffer".
I splitted the part for easier printing.