Thingiverse
Spring Adapter (increase preload) for 3D-Printer feeder by spocky
by Thingiverse
Last crawled date: 4 years, 2 months ago
An Adapter for increasing the preload of your feeder.
This could help if your feeder isn't feeding anymore, because the friction forces are too weak.
Dimensions:
Spring-Side: 8.3 mm
Fitting-Side: 5.7 mm
Preload Length: 4 mm
Outside Diameter: 9.3 mm
Overall Length: 7 mm
Tolerated for 0.4 mm nozzle
This could help if your feeder isn't feeding anymore, because the friction forces are too weak.
Dimensions:
Spring-Side: 8.3 mm
Fitting-Side: 5.7 mm
Preload Length: 4 mm
Outside Diameter: 9.3 mm
Overall Length: 7 mm
Tolerated for 0.4 mm nozzle