Thingiverse
spoon / scoop / tamp by robertwallace
by Thingiverse
Last crawled date: 3 years ago
[update] This is perfect for a resin printer - photos added.
Here's a tiny, useful spoon/scoop with a tamper on one end. It's not for measurement - I haven't checked how much it holds. I use it to help me load small devices with the stuff they need to work -- and to lightly tamp the stuff into place. With the round shaft, you can easily scoop and dump with just a roll of the fingers.
Print it vertically, as modeled. You can add a brim, if you need it, but I've never had to use one. I print on a heated glass bed with a little dab of purple glue stick.
I'd suggest printing this with 100% infill. It only takes a minute or two longer but it adds comfortable mass to the tool and it seems to help the scoop part slice and print more easily without support.
Here's a tiny, useful spoon/scoop with a tamper on one end. It's not for measurement - I haven't checked how much it holds. I use it to help me load small devices with the stuff they need to work -- and to lightly tamp the stuff into place. With the round shaft, you can easily scoop and dump with just a roll of the fingers.
Print it vertically, as modeled. You can add a brim, if you need it, but I've never had to use one. I print on a heated glass bed with a little dab of purple glue stick.
I'd suggest printing this with 100% infill. It only takes a minute or two longer but it adds comfortable mass to the tool and it seems to help the scoop part slice and print more easily without support.
Similar models
thingiverse
free
Herb grinder scoop / multi-tool by ThreeHamsWillKillHim
...ck can be bent easily with a lighter (preferably jet).
made in meshmixer.
if you print it and love it, please do upload a make :)
thingiverse
free
Coffee spoon by avwolferen
... if you like regular coffee strength.
based on an old printed customizable spoon that i couldn't find anymore on thingiverse.
thingiverse
free
Spoon Rest by Jolteon79
... chopsticks.
you may need to adjust how you print it, as the way it appears in thingiview isn't the ideal way to print this.
thingiverse
free
Spoon Divider by TheMasonX
...equest for one for the soup spoons/salad forks. i took into account reddit's suggestions designing this one's messages...
thingiverse
free
Brain & Spine Tea Scoop
...gap or small porous area.
i would only use this for dry goods, not for stirring tea. best to avoid heat/moisture/anything acidic.
thingiverse
free
Long Handled Scooping Spoon by sirajs
...h infill). if you use for chemicals, make sure to check that the abs is chemically compatible with the thing you're scooping.
thingiverse
free
1 cubic centimeter spoon (no support / easy print) by Coumbaya
...the solidworks file is attached if you want to tweak it.
don't forget to rotate the stl to the same orientation as the photo.
thingiverse
free
Scoop Spoon by Bushcaddy
...not need support the the cup where it curves from the horizontal to the vertical.
print with the flat part of the cup on the bed.
thingiverse
free
3D printing coffee SPOON by italymaker
...les: the big one is very detailed (high resolution) and the small one is medium resolution. depends from the dimension you print!
thingiverse
free
Powder Scoop by knabo
...dled smooth scoop. it is also good for scooping coffee into a k-cup. 3/9
the scoop cup is 30mm in diameter and about 25mm tall.
Robertwallace
thingiverse
free
Salt Cellar / Keeper by robertwallace
...zer to allow easy changes to the cellar diameter, height, magnet shape, size and count and, perhaps, customized text for the lid.
thingiverse
free
Legends Core Light Shield by robertwallace
... and blocks the ring light - but has an opening that mimics the usual power-on indicator light of most of your other electronics.
thingiverse
free
Mail Holder - directional by robertwallace
...ifferent font options as well as one with no text. if you want a backdrop for the text, there's a thin piece you can attach.
thingiverse
free
Divider for HF parts drawer by robertwallace
...deling tool in seconds. but i've already done the measuring and testing, so all you need to do is download and print.
enjoy!
thingiverse
free
Yet Another Filament Swatch by robertwallace
... print one of these.
the hole is sized for a normal snap-chain's buckle.
i use a cheap label printer to identify each swatch.
thingiverse
free
Extruder Knob / Dial by robertwallace
...st.)
[edit] added a version with a slightly smaller outer diameter to provide clearance when used with my d-bot x/y motor covers.
thingiverse
free
Snap On Portal Bookstand with tiles by robertwallace
...tomic filament's "light gray v2."
[edit 03/17/19] no changes - just added two photos at neocognitron's request.
thingiverse
free
Power Brick hanging bracket by robertwallace
...mmand strips, which work very well. the photos show it temporarily mounted to a piece of plywood and holding my printrbot brick.
thingiverse
free
Desktop Organizer by robertwallace
...uff.
** yes. i regularly use both of those post-it sizes. these containers hold the 3x3 -inch and the 2x1.5 -inch post-it pads.
Tamp
thingiverse
free
Espresso Coffee Tamp by meirm
...espresso coffee tamp by meirm
thingiverse
espresso coffee tamp, it works.
thingiverse
free
Universal tamp
... so you can print the foot and spin the handle on a lathe using the profile guide. or even cut both of them on a cnc metal lathe.
thingiverse
free
Tamping Station LaSpaziale Portafilter by createch2
...aspaziale portafilter. a useful help especially for the single basket filter with its excentric outlet for tamping and weighing.
thingiverse
free
Espresso Tamp by whax
...inted one instead. designed in sketchup and then scaled slightly as an stl. the base is ~49mm at it's widest and ~72mm tall.
thingiverse
free
LaPavoni portafilter tamping stand by Project2571
...ith prusa. when adding stand on slicer rotate stand at z axis 63° and x axis -30° for getting bottom plane straight on the table
thingiverse
free
Remixed Tamp Stand by Tekwhat
...t hole by 3mm to allow the portafilter to sit flush. the base design did not allow for a level tamp with the factory portafilter.
thingiverse
free
delonghi ecp35.31 tamping station
...delonghi ecp35.31 tamping station
thingiverse
delonghi ecp35.31
thingiverse
free
Espresso Tamp by RAWRXD
...espresso tamp by rawrxd
thingiverse
i forget the diameter, but i use it for my mr coffee machine
thingiverse
free
LaPavoni tamping station by Luxinator10
...utf8&psc=1
distributor 51mm: https://www.amazon.de/gp/product/b07hh9hhxn/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=utf8&psc=1
thingiverse
free
49mm coffee tamp by nolvad
...ossible to custom mold the handle
printer it, the lip didn't work very so i am going to remove it besides that it works great
Scoop
thingiverse
free
Scoop
...scoop
thingiverse
scoop
thingiverse
free
A scoop
...a scoop
thingiverse
a scoop.
thingiverse
free
Scoop
...scoop
thingiverse
scoop for robot
thingiverse
free
Scoop
...scoop
thingiverse
it's just a scoop
thingiverse
free
Scoop
...scoop
thingiverse
simple scoop, works for whatever you want.
thingiverse
free
Scoop by Soyelflaco
...scoop by soyelflaco
thingiverse
scoop
thingiverse
free
A tea scoop
...a tea scoop
thingiverse
a tea scoop.
thingiverse
free
Scoop by Tortoise81
...scoop by tortoise81
thingiverse
simple laundry scoop
thingiverse
free
Scoop by sjpiper145
...scoop by sjpiper145
thingiverse
it's a scoop
thingiverse
free
Coffee Scoop
...coffee scoop
thingiverse
large size coffee scoop
Spoon
thingiverse
free
spoon
...spoon
thingiverse
spoon
thingiverse
free
spoon
...spoon
thingiverse
can be used as a classic spoon.
thingiverse
free
Spoon Rest (Spoon Stand Spoon Holder)
...d:
https://all3dp.com/1/food-safe-3d-printing-abs-pla-food-safe-filament/
tinkercad:
https://www.tinkercad.com/things/bedmrkp26mf
thingiverse
free
spoon by 3Dvillain
...spoon by 3dvillain
thingiverse
spoons
thingiverse
free
Spoon by gnamp
...spoon by gnamp
thingiverse
spoon
thingiverse
free
spoon by semelle
...spoon by semelle
thingiverse
spoon
thingiverse
free
Spoon by katieb279
...spoon by katieb279
thingiverse
spoon
thingiverse
free
spoon by stevehaines
...spoon by stevehaines
thingiverse
spoon
thingiverse
free
Spoon by free123
...spoon by free123
thingiverse
spoon
thingiverse
free
Spoon by lurpen420
...spoon by lurpen420
thingiverse
simple spoon