Thingiverse
Spool Winder and also universal stands for spools by 3DBullett
by Thingiverse
Last crawled date: 4 years, 7 months ago
Simple Spool Winder including universal Stand for holding the spool during print.
i use this one often, cause i most time buy very cheap filament and the biggest problem are the small spools the filament is coming on.
If you mount the spool to the printer it often happens that the filament is jumping from the spool and get stuck somewhere. Thats why i transfer the filament to a "standard" bigger spool and everything is fine.
Video in action: https://youtu.be/bAeq6FQi_S4
Motor @ ebay: https://ebay.us/Ab00Vw
I use the 3,5rpm and this is a little slow, you see it in the video, but buy what you want.
The motor speed can be reduced with lower voltage.
Ask if you have questions or need an other adapter for your motor!
The universal spool holder is from DM4DS - also here on thinigverse!https://www.thingiverse.com/thing:2950910
Parts to assemble: 2x M3 screws , i use M3x16
2x M3 nut
1 for the knob , one for the axe , if you do it with a motor, you don´t need the knob...
i use this one often, cause i most time buy very cheap filament and the biggest problem are the small spools the filament is coming on.
If you mount the spool to the printer it often happens that the filament is jumping from the spool and get stuck somewhere. Thats why i transfer the filament to a "standard" bigger spool and everything is fine.
Video in action: https://youtu.be/bAeq6FQi_S4
Motor @ ebay: https://ebay.us/Ab00Vw
I use the 3,5rpm and this is a little slow, you see it in the video, but buy what you want.
The motor speed can be reduced with lower voltage.
Ask if you have questions or need an other adapter for your motor!
The universal spool holder is from DM4DS - also here on thinigverse!https://www.thingiverse.com/thing:2950910
Parts to assemble: 2x M3 screws , i use M3x16
2x M3 nut
1 for the knob , one for the axe , if you do it with a motor, you don´t need the knob...