Spool Holder universal or M8 screw by DM4DS

Last crawled date: 3 years ago

Spool Holder:
2 Main parts : the screw and the nut
2 bolts (or files with the hole through the complete part for use with a M8 Screw...)
The Screw is included in different types and lenght.
screw with 70mm lenght
screw with 100mm lenght
screw with 70mm lenght and complete hole
screw with 100mm lenght and complete hole
screw with 70mm lenght without the cutouts and complete hole

screw with 100mm lenght without the cutouts and complete hole

bolts for the right and left side
bolts for left and right with border
For my spools i use the 70mm one.
If you need a bigger diameter then included, let me know and i make them for you, but all my filament spools fitts onto the holder....
Update 1 - 12.06.2018
Added 2 more bolts. 2 with the border but with a flat surface to print them while lying on the bet...
Update 2:
Added 2 more designs for the short version with the bolts - not for the screw.
If you want the design for the screw, let me know
If you want your name on the parts, let me know
All pictures are direct after or during the print. Nothing modified or reworked.
The pictures with the blue v1 are with layer height 0.2mm.
The pictures with the white v3 are with layer height 0.1mm
All printed without supports! No supports needed in all designs!
some parts you have to rotate, but no support.
Update 3:
Added also the 70mm v3 version with M8 hole going through
added also the 100mm V3 version with normal holes for the bolts
the 100mm v3 version with the M8 hole going through
Update 4:
Added 1 Universal stand for the normal versions + one for the screw version
to lay down the spools ontop of a box or what else without need to print new spool holder!
Update 5:
Added 2 flat versions of the universal stand with only 3mm height, instead of 5mm
Pay attention for the pin in the middle don´t like side force
Update 6: (25.06.2018)
Added 2 more designs. v4 and v5. All are printable WITHOUT support if your printer is well calibrated and the layerheight you choose is not too high. I printed mine with only 0.1 and relativ fast (60mm/s) without problems!
look at the open thread! an open spiral , filled hen screwed together. Awesome. Try it and feel it, also.
Pictures added also. The collage shows v5 of the "nut-side" and v3 of the screw on the universal stand, only the spool is missing :)
Update 7 (02.07.2018)
Added 1 more pair. I got some new filament and in the spool is for the first time a 80mm hole. So i made a "clean" one with 87.5mm diameter. without branding for use with the bolts.
Also added my stands, tht i added onto the top of my box instead if laying them in the universal stand spool holders.
Now it is more than universal. Have fun with it
Please look more often for updates. Also look at my other designs.
I print everything on the cheap Anet A8 with my own modifications and all designs working great. All pictures are made by me and showing the original parts without photoshoping or what else. And if they are printable on this cheap machine, they must look like beautys on your machine!