Thingiverse
Spoiler Nissan GT-R 1:10 RC Drift by Malte92
by Thingiverse
Last crawled date: 4 years, 7 months ago
nozzle 0.4mm
layer height 0.15mm
wall line count 4 (=solid spoilerfins)
infill 20% triangles
support with 65° overhang angle
specs:
spoiler
width 150mm
frontradius of the spoilerlip 346.25mm
spoilerfins 2mm
strud
plate 20x10mm
holes 1.9mm diameter
height 36mm
it took 2hrs and 20min to print the spoiler and all 4 struds
layer height 0.15mm
wall line count 4 (=solid spoilerfins)
infill 20% triangles
support with 65° overhang angle
specs:
spoiler
width 150mm
frontradius of the spoilerlip 346.25mm
spoilerfins 2mm
strud
plate 20x10mm
holes 1.9mm diameter
height 36mm
it took 2hrs and 20min to print the spoiler and all 4 struds