Thingiverse
Split feet for Reach3D by Grogo666
by Thingiverse
Last crawled date: 4 years, 7 months ago
Split feet design to get a better stability on your Reach3D.
Could be usable on any 2040 extrusion profile (other printers...)
NO TABS file : obviously, with no tabs =)
H TABS : for horizontal 2040
V TABS : for vertical 2040
All joints are perfectly symmetrical, so that you can print each foot in any other.
On the Reach, the better setup I had to improve stability is :
2x split feet H tabs, bed side
1x original foot by Ashaman (remixed from) extruder side.
(had to get ramps board out of the way)
Put a Tnut underside, and one at each top of split feet tabs.
No more wooble when printing !
Could be usable on any 2040 extrusion profile (other printers...)
NO TABS file : obviously, with no tabs =)
H TABS : for horizontal 2040
V TABS : for vertical 2040
All joints are perfectly symmetrical, so that you can print each foot in any other.
On the Reach, the better setup I had to improve stability is :
2x split feet H tabs, bed side
1x original foot by Ashaman (remixed from) extruder side.
(had to get ramps board out of the way)
Put a Tnut underside, and one at each top of split feet tabs.
No more wooble when printing !