Thingiverse
Splice Jig by EelAudio
by Thingiverse
Last crawled date: 3 years, 3 months ago
This is just a little jig to help splicing microphone cable (or other cable). The diameter is 0.3 inch, and length is 1 inch. There are 3 channels along the length to allow the spliced wires to maintain their separation.
To use this, cut your wire to length by using the jig to help you measure.
Twist the grounding shield so it can be soldered after the jig has been put in place.
Solder and heat shrink the hot and cold wires.
Put the jig into position and then solder the shield wire over them.
Seal up with heat shrink (glue filled preferred)
To use this, cut your wire to length by using the jig to help you measure.
Twist the grounding shield so it can be soldered after the jig has been put in place.
Solder and heat shrink the hot and cold wires.
Put the jig into position and then solder the shield wire over them.
Seal up with heat shrink (glue filled preferred)
Similar models
thingiverse
free
Extension Cord connection (Splice Box)
...me.
put connection in one half of splice box and attach with 4" cable ties.
attach 2nd half of splice box using 2 wire ties.
thingiverse
free
18650 Rewrapping Jig by damo23day
...round height jig, this part of the jig will position the battery center of the heat shrink. using a heat gun re wrap your battery
thingiverse
free
Soldering Wire Stand (Helping Hands) by paliskey333
...d the bottom to hold the moving arm in place.there are holes in the four bottom corners so it can be attached to a table surface.
thingiverse
free
Solder Fingers with Heat Shrink Reminder by lessonpix
...quot;heat shrink !" text to the floor of this excellent solder fingers model.
thank you, mistertech, for the starting point!
thingiverse
free
WallPlug Power Supply kink protection for Acer Swift 1 by Hosenbundmann
...nd/or some strong tape can be used to connect the two halves.
heat shrink tubing or electrical tape to further support the cable.
thingiverse
free
Remote Cable Switch by TheBlueSkywolf
...itch which is soldered to a wire and secured with some hot glue.
i added some heat-shrink tubing for protection and a better look
thingiverse
free
Soldering Guide by andyshen
...soldering guide by andyshen
thingiverse
simple soldering guide for splicing wires.
thingiverse
free
Soldering Wire Holder by Lucan07
...ob easier with this simple little stand to hold wires together for soldering slide over some heat shrink and the jobs a good one.
thingiverse
free
Wire Holder
...wire holder
thingiverse
this is yet another wire holder for solder splicing.
thingiverse
free
1/8" mini phone splice shell by elhalpern
...n the three channels and filling it with epoxy i use a small spring loaded clamp to hold it tightly closed while the epoxy cures.
Eelaudio
thingiverse
free
Sound Devices MixPre-3 Stand by EelAudio
...ingiverse
this is an angled desk stand for the mixpre-3 to set on. you can stick anti-skid rubber on the flat parts if you wish.
thingiverse
free
Anderson Powerpole Shroud by EelAudio
...ill out the size cable you need.
i'd recommend potting these with epoxy afterwards. scotch-weld 2216 is my favorite for that.
thingiverse
free
ORTF Holder for Rode Blimp Windscreen by EelAudio
...rts to allow an elastic shock absorber to support the microphones.
threaded inserts are part number 93365a110 from mcmaster carr.
thingiverse
free
Microphone Cable Splitter by EelAudio
...side and then clamp the two halves together until it cures. i've not had good luck with silicone since it stretches too much.
thingiverse
free
Rode Blimp Tripod Mount Adapter by EelAudio
...out of polycarbonate and it's quite stout. even in high winds i don't think this would be the part that would fail first.
thingiverse
free
Rode Blimp Windscreen Stereo Microphone Holder by EelAudio
...he lyres, they are m3 x 16 mm flanged button head cap screws.
there are two files, one for right facing, and one for left facing.
thingiverse
free
Stereo Binaural Microphone Enclosure by EelAudio
...d a 3/8" threaded insert instead of the 1/4 one.
part number for the 3/8" insert is: https://www.mcmaster.com/93365a290
thingiverse
free
Low Profile Housing for Genasun GV-5 MPPT Charger by EelAudio
...restrict the powerpoles, so you can position them how you like. the pictures show the housing printed in carbon fiber filled pla.
thingiverse
free
Microphone Windjammer Cage by EelAudio
...crew, quantity 9
pn: 92196a111 4/40 x 9/16 socket head screw, quantity 4
pn: 92196a302 4/40 x 1 1/4 socket head screw, quantity 2
Splice
3ddd
$1
"Splice" table and chairs
..."splice" table and chairs
3ddd
splice
комплект мебели из стола и 6 стульев
turbosquid
$90
SMT automatic splice tape
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Splice Stool,Table,Bar Stool
... барный
набор мебели для бара, паба, дома.угловые формы придают индустриальный вид.
материал-березовая фанера.
3dfindit
free
Splices
...splices
3dfind.it
catalog: te connectivity
3dfindit
free
Junction Splices
...junction splices
3dfind.it
catalog: te connectivity
thingiverse
free
Cable Splices for BlueROV by thegwa
...cable splices for bluerov by thegwa
thingiverse
cable splices for bluerov
thingiverse
free
Tyrannosaurus splicing toys
...plicing toys
thingiverse
this toy design by ime3d
it have a splicing toys library
i use it teach 3~5 age kids what is dinosaur .
thingiverse
free
Rope Splicing Fid plk.nz by mukiwa
...rope splicing fid plk.nz by mukiwa
thingiverse
fid, rope splicing
thingiverse
free
Rope Splicing Fid plk.nz by mukiwa
...rope splicing fid plk.nz by mukiwa
thingiverse
fid, rope splicing
thingiverse
free
Rope Splicing Fid plk.nz by mukiwa
...rope splicing fid plk.nz by mukiwa
thingiverse
fid, rope splicing
Jig
turbosquid
$25
jig-saw_mid_SM
...uid
royalty free 3d model jig-saw_mid_sm for download as obj on turbosquid: 3d models for games, architecture, videos. (1244761)
turbosquid
$20
jig-saw_low
...osquid
royalty free 3d model jig-saw_low for download as obj on turbosquid: 3d models for games, architecture, videos. (1244760)
turbosquid
$10
jig-saw_hi
...bosquid
royalty free 3d model jig-saw_hi for download as obj on turbosquid: 3d models for games, architecture, videos. (1244757)
turbosquid
$7
Jig Armchair
...squid
royalty free 3d model jig armchair for download as max on turbosquid: 3d models for games, architecture, videos. (1648936)
turbosquid
$5
Jig Tail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.