Thingiverse
Splatmaster z200 safety pin by kvdveer
by Thingiverse
Last crawled date: 4 years, 3 months ago
The safety pins on the Splatmaster Z200 are quite sensitive to breakage on the safe side.
This thing is intended as a drop-in replacement. I've tried ABS and PLA. PLA gives the best functioning part, as the friction is lower.
You'll need to add o-rings, so the pin keeps its position.
For the hot side: od=7mm, id=4mm, thickness=1.5mm
for the safe side: od=6mm; id=3mm, thickness=1.5mm
I found that the part works fine without the o-rings as well, so I also added versions without the o-ring groove, these parts should be more durable, as they lack the weak spot the original part had.
This thing is intended as a drop-in replacement. I've tried ABS and PLA. PLA gives the best functioning part, as the friction is lower.
You'll need to add o-rings, so the pin keeps its position.
For the hot side: od=7mm, id=4mm, thickness=1.5mm
for the safe side: od=6mm; id=3mm, thickness=1.5mm
I found that the part works fine without the o-rings as well, so I also added versions without the o-ring groove, these parts should be more durable, as they lack the weak spot the original part had.