Thingiverse
Spitfire Propeller 1:4 scaled model by viper1990
by Thingiverse
Last crawled date: 4 years, 5 months ago
Spitfire Propeller designed with Autocad 3D 1:4 model
Root hub to fit into spinner: 3.4cm diameter circle. From Root to tip = 375 mm or 14.76 inches
Comes in 5 parts, glued together using locttite 406 superglue for plastics
Estimated 1.75mm filament needed for 1 blade (1:4 scale model) = Between 15meters to 25meters (49ft to 82ft)
Print with PLA to avoid wrapping and to produce relatively sharp trailing edge of the blade.
Root hub to fit into spinner: 3.4cm diameter circle. From Root to tip = 375 mm or 14.76 inches
Comes in 5 parts, glued together using locttite 406 superglue for plastics
Estimated 1.75mm filament needed for 1 blade (1:4 scale model) = Between 15meters to 25meters (49ft to 82ft)
Print with PLA to avoid wrapping and to produce relatively sharp trailing edge of the blade.