Thingiverse
Spirograph machine
by Thingiverse
Last crawled date: 6 years ago
It is my design for a spirograph machine.
It is 3d printed except for an M2 nut and bolt to fix a pen to the handler.
All the pieces can be printed at 0.32 except the nuts and bolts. I recommend changing the resolution to 0.2 at least for the bolt areas and 0.16 for the nuts.
You can save printing time and money printing some pieces without the bottom and top layers like me.
Pieces details
0.32 - Can be printed without top or bottom layers, excepts on the threaded areas (you can try it, I didn't try it yet).
1 x Base center.
1 x Small arm base.
2 x arm bases.
2 x spur gear 50
1 x spur gear 40
2 x connecting rod
Can be printed without the top layer, of course, the flat side in the bottom.
1 x Spur gear 80 - 0.32
The rest
1 x pen holder - 0.2
1 x big nut - 0.16
5 x nuts - 0.16
It is 3d printed except for an M2 nut and bolt to fix a pen to the handler.
All the pieces can be printed at 0.32 except the nuts and bolts. I recommend changing the resolution to 0.2 at least for the bolt areas and 0.16 for the nuts.
You can save printing time and money printing some pieces without the bottom and top layers like me.
Pieces details
0.32 - Can be printed without top or bottom layers, excepts on the threaded areas (you can try it, I didn't try it yet).
1 x Base center.
1 x Small arm base.
2 x arm bases.
2 x spur gear 50
1 x spur gear 40
2 x connecting rod
Can be printed without the top layer, of course, the flat side in the bottom.
1 x Spur gear 80 - 0.32
The rest
1 x pen holder - 0.2
1 x big nut - 0.16
5 x nuts - 0.16