Thingiverse
Spinners for P-38 from 3DLabPrint
by Thingiverse
Last crawled date: 5 years, 4 months ago
I did not like the spinners designed by 3dlabprint for the P-38.
So I designed ones that will be stronger and (in my opinion) will look nicer on the model.
Important: they are designed for propeller 9/6' (CW and CCW) and engine Turnigy D3530/14 1100KV .
Print setting:
Maetrial - PETG
Layer Height 0,2mm
You will also need 4 Self Tapping Screw M3x12mm.
My other designs for 3dlabpint p-38:
Motor mount: https://www.thingiverse.com/thing:4078761
Wheels: https://www.thingiverse.com/thing:4078785
So I designed ones that will be stronger and (in my opinion) will look nicer on the model.
Important: they are designed for propeller 9/6' (CW and CCW) and engine Turnigy D3530/14 1100KV .
Print setting:
Maetrial - PETG
Layer Height 0,2mm
You will also need 4 Self Tapping Screw M3x12mm.
My other designs for 3dlabpint p-38:
Motor mount: https://www.thingiverse.com/thing:4078761
Wheels: https://www.thingiverse.com/thing:4078785