Thingiverse
Spinner for Fw Ta 152 3DLabPrint by poharatek
by Thingiverse
Last crawled date: 5 years, 6 months ago
"Scale" spinner for Fw Ta 152.
Mine is printed from Colorfabb LW-PLA and weighs 9g ;)
You will also need two 2mm self-tapping screws.
Print settings: high infill (min 30%), at least 2 perimeters.
My other projects for Fw Ta 152:
Servo mount -https://www.thingiverse.com/thing:4254389
Engine mount -https://www.thingiverse.com/thing:4254360
Mine is printed from Colorfabb LW-PLA and weighs 9g ;)
You will also need two 2mm self-tapping screws.
Print settings: high infill (min 30%), at least 2 perimeters.
My other projects for Fw Ta 152:
Servo mount -https://www.thingiverse.com/thing:4254389
Engine mount -https://www.thingiverse.com/thing:4254360