Thingiverse
Spiderman lithophane window art by CheesmondN
by Thingiverse
Last crawled date: 4 years, 10 months ago
Spiderman window art that comes alive when you have light behind it.
Print slowly and at low layer height with 100%infill.
I printed it on an Ender 3 at 0.12 layer height, 40mm/s speed (10mm/s initial layer) with 100% infill. I have provided the gcode for PLA at 200C with bed temp 60C
See my other designs, including more Marvel and DC here: https://www.thingiverse.com/cheesmondn/designs
Print slowly and at low layer height with 100%infill.
I printed it on an Ender 3 at 0.12 layer height, 40mm/s speed (10mm/s initial layer) with 100% infill. I have provided the gcode for PLA at 200C with bed temp 60C
See my other designs, including more Marvel and DC here: https://www.thingiverse.com/cheesmondn/designs