Thingiverse
Spektrum FPV for Opterra by Heatracer
by Thingiverse
Last crawled date: 3 years ago
FPV cradle for Spektrum 650TVL cam and Spektrum 600mw VTX. VTX is held in with a single zip tie. Cradle supports the antenna for added security. Plenty of airflow for the VTX. I designed this for use with my E-Flite Opterra but may be used on any R/C vehicle.
Similar models
thingiverse
free
FPV Camera/Vtx Cradle (HS1177, RunCam Camera) by Painless360
...lite vtx units.
the underside is flat allowing for easy double sided tape or velcro fastening.
weight at 30% infill is approx 8g.
thingiverse
free
E-Flite Opterra Simple FPV Backpack/Pod by Catseyeguy
...mounting may need some modification.
in terms of hardware you'll need:
x2 m2 x 10mm screws.
m2 camera mounting screws.
enjoy!
thingiverse
free
Simple E-Flite Opterra FPV Backpack V2 by Catseyeguy
...ico
ps: the version in the picture interferes with the clip that secures the nose in place. this issue is corrected in the stl.
thingiverse
free
Fatshark TVL700(600) FPV camera snap in Holder for E-Flite Opterra by raar
...thingiverse
just a fatshark tvl700(600) fpv camera snap in holder for the e-flite opterra. so the camera is simply removable ;-)
thingiverse
free
Spektrum VA1100 FPV by chphead24
... - ultra micro fpv camera system
i have not printed just created to use in 3d models to ensure it will fit for my indented use.
thingiverse
free
Tiny Whoop FPV Antenna Protector: for Spektrum VA1100, FX797t FPV Pod, Micro Cam VTX 25mW by LukaM
...tached to camera/vtx, slide the second in place and glue both the top and bottom cross section for strength and stability.
enjoy!
cg_trader
$15
Spektrum DX6 LCD or Camera Support addon | 3D
... 3d
cg trader
the parts that you need to add your lcd for fpv to your spektrum dx6 radio 3d print spektrum fpv dx6 gadgets other
thingiverse
free
30mm VTX Horizontal FPV Mount by bryanpearson
...andoffs. antenna exits the rear of the fpv quadcopter. use a ziptie or two to secure the antenna connector and vtx in epic bliss.
thingiverse
free
TX Spektrum DX7 stand for FPV Freerider by Marti
...v freerider by marti
thingiverse
if you want a break with your fpv freerider training with tx spektrum dx7 ... you need stand :)
thingiverse
free
Custom Opterra 1.2 FPV mount
...o the site so i hope i did everything right. i redesigned this in tinkercad.
not much on this site for the opterra 1.2m rc plane.
Heatracer
thingiverse
free
Timber RunCam2 Mount by Heatracer
...timber runcam2 mount by heatracer
thingiverse
timber wing mount for runcam2.
thingiverse
free
Winglet Bolt for Opterra by Heatracer
...winglet bolt for opterra by heatracer
thingiverse
winglet bolt for the opterra 2m wing.
thingiverse
free
Opterra Wing Bolt by Heatracer
...opterra wing bolt by heatracer
thingiverse
e-flite opterra wing bolt replacement.
thingiverse
free
Ball Cup Driver by Heatracer
...ball cup driver by heatracer
thingiverse
ball cup driver for team associated ball cups.
thingiverse
free
Inductrix Plus FPV Travel Case by Heatracer
...e lid on. i used foam on the lid to put slight pressure on the quad to hold it so it would not flip over if the case gets tipped.
thingiverse
free
Vaterra Ascender Body Clip Pull. by Heatracer
...st scale up to your needs. installation is a bit easier if you slightly heat them to get them around to the end of the body clip.
Opterra
thingiverse
free
Opterra wing lock by ig0rb
...opterra wing lock by ig0rb
thingiverse
opterra wing lock
thingiverse
free
Winglet Bolt for Opterra by Heatracer
...winglet bolt for opterra by heatracer
thingiverse
winglet bolt for the opterra 2m wing.
thingiverse
free
Opterra Wing Bolt by Heatracer
...opterra wing bolt by heatracer
thingiverse
e-flite opterra wing bolt replacement.
thingiverse
free
OPTERRA 2M - LiPo Support by Tunderbird
...opterra 2m - lipo support by tunderbird
thingiverse
opterra 2m - lipo sliding support
thingiverse
free
Eflite opterra wing bolt by slingshots-1
...wing bolt by slingshots-1
thingiverse
this is a revised version of the opterra wing bolt. mine has the supports needed to print.
thingiverse
free
Standard 2808 Motor Mount for Opterra 1.2M
...opterra 1.2m
thingiverse
motor plate to retrofit a standard 2808 motor with staggered mounting pattern to the opterra 1.2m wing.
thingiverse
free
OPTERRA 2M - CG BALLANCER
...opterra 2m - cg ballancer
thingiverse
ball bearings: 2x625
screws: 6x m3x10mm
thingiverse
free
Airbrake Slots for E-Flite Opterra by HughN
...kins part number jp4406305.
this object is a 3d printed 'slot' to accommodate the airbrakes into the opterra's wings.
thingiverse
free
Opterra flying wing - wing bolt
...y to break but be aware of the small notch.
the fit my opterra with a little bit of force. tolerance are not perfect but it works
Spektrum
3ddd
$1
SPECTRUM GP 512
...spectrum gp 512 3ddd трансформер обеденный раскладной стол. сайт производителя:http://spektrummebel.ru/item.php?id=556 ...
thingiverse
free
Spektrum DX3
...spektrum dx3
thingiverse
for spektrum dx3 to replace ageing foam wheel with 1/10 scale touring car tire
thingiverse
free
Spektrum iX20 tray
...spektrum ix20 tray
thingiverse
spektrum ix 20 tray
thingiverse
free
Roller for Spektrum DX6i by BennyMan455
...roller for spektrum dx6i by bennyman455
thingiverse
roller to suit spektrum dx6i may fit in other spektrum controllers not sure.
thingiverse
free
Spektrum AR636 Mount by sanamtisse
...spektrum ar636 mount by sanamtisse
thingiverse
holder for spektrum ar636 receiver
thingiverse
free
Spektrum DX6 Gimble Protector
...spektrum dx6 gimble protector
thingiverse
just a gimple protection device for my spektrum dx6
thingiverse
free
monitor holder spektrum inductrix by ejpsx
...monitor holder spektrum inductrix by ejpsx
thingiverse
monitor holder spektrum inductrix
thingiverse
free
Spektrum DX3.0 trigger by nowires
...ires
thingiverse
this is a replacement trigger for the spektrum dx3.0 rc transmitter.
i printed this with petg and 0.4mm nozzle.
thingiverse
free
spektrum thumbs accomodator by Paxony
...accomodator by paxony
thingiverse
this is a thing that accomodates your flight experience while using your spektrum radio system
thingiverse
free
Spektrum DX8 Gimbal Protection by kolaCZek
...spektrum dx8 gimbal protection by kolaczek
thingiverse
spektrum dx8 gimbal protector - simple and functional...
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.