Thingiverse
Speed Boat 3 RC - direct drive by 3dmakers
by Thingiverse
Last crawled date: 4 years ago
Modified propeller mount for the Speed Boat 3 RC, driven directly by servo.
What is required to apply this mod ?:
Standard servo - I'm testing with Serwo TowerPro SG-5010.
This mod will require modified back deck.
2 M3 screws and nuts
Print all parts, make 2 holes for m3 screws.
Additional features:
holes for motor cabling
holes for camera
optional stabilization fin's (gle at the bottom)
My recomendation is to use proppeler_stand_simple.stl, boat is much more stable.
Video:https://www.youtube.com/watch?v=HT9F3c7xBI0https://youtu.be/_kumDirFEh4https://youtu.be/FtWh6GJbo28https://youtu.be/fOJJV3mqEkU
What is required to apply this mod ?:
Standard servo - I'm testing with Serwo TowerPro SG-5010.
This mod will require modified back deck.
2 M3 screws and nuts
Print all parts, make 2 holes for m3 screws.
Additional features:
holes for motor cabling
holes for camera
optional stabilization fin's (gle at the bottom)
My recomendation is to use proppeler_stand_simple.stl, boat is much more stable.
Video:https://www.youtube.com/watch?v=HT9F3c7xBI0https://youtu.be/_kumDirFEh4https://youtu.be/FtWh6GJbo28https://youtu.be/fOJJV3mqEkU