Thingiverse
Spectrum DX6i Eachine LCD5802S Mount by Zucky2016
by Thingiverse
Last crawled date: 4 years, 8 months ago
I really liked the original design but the size did not fit my display. I had some bolts from an old desk that had nice flat heads on them and fit perfectly into the slots on the Eachine LCD5208S I have.
Edited the original to use bolts for the slider instead.
See the original for the parts list.
The bolts for the slider measure 5.5mm in diameter, so are likely an M5 bolt. The head is just under 12mm diameter and 2.5 mm thick.
Added Sep-24-2017
New part added that stabilizes the mount for the display rock solid now. You don't have to use the screw on the bottom of the display to lock it in place, there's enough friction that it doesn't slde off unless you pull it off.
Coming Soon - Taranis Q X7
That's right, I have some modified parts that allow this mount to easily fit onto a Taranis Q X7. I'll be adding them along with photos soon.
Edited the original to use bolts for the slider instead.
See the original for the parts list.
The bolts for the slider measure 5.5mm in diameter, so are likely an M5 bolt. The head is just under 12mm diameter and 2.5 mm thick.
Added Sep-24-2017
New part added that stabilizes the mount for the display rock solid now. You don't have to use the screw on the bottom of the display to lock it in place, there's enough friction that it doesn't slde off unless you pull it off.
Coming Soon - Taranis Q X7
That's right, I have some modified parts that allow this mount to easily fit onto a Taranis Q X7. I'll be adding them along with photos soon.