Spatula holder for FABtotum by johnnytrapano 3d model
Warning. This content is not moderated and could be offensive.
m4
3dmdb logo
Thingiverse
Spatula holder for FABtotum by johnnytrapano

Spatula holder for FABtotum by johnnytrapano

by Thingiverse
Last crawled date: 3 years, 1 month ago
Spatula holder for the FABtotum personal fabricator.
I used a self threading screw to fix the holder on the hole in the spool compartment.
If you use a screw with head bigger than 3mm you should scale the .stl by about 5%.
Designed using Autodesk Fusion 360
Printed using FABtotum with red PLA by FABtotum
Layer height 0.2mm, Infill 0%, Shell thickness 2 mm.
Printing time 14 min

Tags