Thingiverse
Sparkcube XL beltclamp by freekarn
by Thingiverse
Last crawled date: 4 years, 7 months ago
Alternative beltclamp for the Sparkcube XL if you don't want to mess around with glue or you want to be able to lenghten, shorten or replace the belts after a while.
Print the test piece to determine which clamp suits best for your printer, the smallest 1,4 is exact modelled after a GT2 belt which is nominally 1.38mm thick, then the steps on the test piece corresponds with the STLs ranging from 1.4 to 1.8mm.
I print at 100% infill for a strong piece.
It is designed for a .4mm nozzle.
Print the test piece to determine which clamp suits best for your printer, the smallest 1,4 is exact modelled after a GT2 belt which is nominally 1.38mm thick, then the steps on the test piece corresponds with the STLs ranging from 1.4 to 1.8mm.
I print at 100% infill for a strong piece.
It is designed for a .4mm nozzle.