SpaceX Falcon 9 Rocket by twuelfing

Last crawled date: 3 years ago

UPDATE: 9/22/2106
I replaced all the stage one segment files
UPDATE: 8/1/2016
I have corrected some issues i noticed while doing a test print.
Hinge area on the landing legs has been revised
grid fins are more accurate now, not sure how they will print yet
corrected some geometry issues on the engines so they will hopefully print better in the v002 file
adjusted some of the tubes and pipes based on some better reference photos I found.
I just finished modeling this. I am currently test printing it.
I am continuing to update the model and refine it. If you have modeled a piece of this rocket and would like to share it I would love to keep improving this model.
I have a couple project ideas for using this rocket after i get the mesh cleaned up and printing smooth and reliably.
Unless you print it very large there are likely a lot of details that wont show up in the print.
I took some liberties here and there with the model to add detail but isnt exactly the same as the rocket.
Also every mission the rocket seems to be slightly different in some detail here or there.
I will keep this updated as I slice the model up and to address issues i notice while I print this.
Also its waaaay over sized in the stl file, just scale it down to whatever size you want.