GrabCAD
![SPACE 2029](/previews/7361002.jpg)
SPACE 2029
by GrabCAD
Last crawled date: 2 years ago
The name "SPACE 2029" I derived it from the Italian-British TV series of the 1970s "Spazio 1999".
https://en.wikipedia.org/wiki/Space:_1999
https://www.youtube.com/watch?v=Y6BXaGEuqxo
PROBLEM SOLVING
FIRST PROBLEM:
the spaceships in the phases of landing and take-off project debris in all directions.
Solution: protect the pneumatic crane behind a shield, for example a rock (the photograph is only indicative).
ENG
SPACE 2029
I was inspired by a two-valve shell in a pyramid shape, which can be opened and closed in two half-pyramids.
The two half-pyramids are defined by five rods and four nodes. Each rod is structured by a row of balloons filled with inert gas (helium, nitrogen or other).
Theoretically, but it has to be proven, a pultrusion could be done with sintered Lunar dust.
The nodes are made of aeronautical composite material based on epoxy resin and a mix of kevlar and carbon.
In the technical literature I found written that kevlar is used to reinforce the edges, while the body is a mix of kevlar-carbon.
The rods are made from a row of flasks, glued together, in Vektram TM and silicone (... even the polyimides respond well).
Photovoltaic Arrays: in sailing boats and in the automotive sector, attempts are being made to integrate solar panels with the sail and / or bodywork.
It is proposed to mount the photovoltaic arrays in adherence to the pneumatic structure.
The two half-pyramids are reinforced with some rods.
The two half-pyramids are hinged on the upper node and can be decoupled in the two + two lower nodes.
For stability, all the electronics, electro-mechanics, pneumatics and batteries are located in correspondence with the carters of the two + two central wheels.
The wheels in total are four + four, of which four are driving; the steering takes place as on the tracked vehicles, acting on the two + two central wheels.
HOW THE SPACE 2029 WORKS
1 - the shuttle is landing;
2 - Space 2029 approaches with the two half-pyramids open;
3 - Space 2029 overlaps the load to be carried;
4 - the half-pyramids close;
5 - the two half-pyramids are mechanically joined with a automatic hooks system;
6 - the load is lifted with the winch, mounted at the tip of the pyramid;
7 - the cargo is carried from the launch pad to the moon base;
8 - arrived at the lunar base, the load is placed on the ground with the winch;
9 - the two unhook system and half-pyramids open;
10 - Space 2029 moves away from the cargo.
BIBLIOGRAPHY:
- Manuale di Elettrotecnica, Elettronica e Automazione - ed.Hoepli - Ortolani-Venturi;
- Manuale di Meccanica, Meccatronica ed Energetica - ed.Zanicchelli - autori vari;
- Scienza e Tecnologia dei Materiali - McGraw-Hill - Smith;
- Esercitazioni di Scienze delle Costruzioni 1 - Pitagora Editrice - Viola;
- NASA's Plan for Sustained Lunar Exploration and Development - Artemis - NASA;
- La rivincita di Icaro, Storia dell'Astronautica - Giunti-Nardini - Masini-Von Braun.
by Germano Pecoraro Designer - Italy
IT
For any translation mistakes, below the original text in Italian:
SPACE 2029
Ci si è ispirati ad una conchiglia bi-valve a forma di piramide, apribile e chiudibile in due semi-piramidi.
Le due semi-piramidi sono definite da cinque aste e quattro nodi. Ogni asta è strutturata da una fila di palloni pieni di gas inerte (elio, azoto o altro).
In teoria, ma è tutto da dimostrare, si potrebbe fare una pultrusione con polvere Lunare sinterizzata.
I nodi sono realizzati in materiale composito aeronautico a base di resina epossidica e un mix di kevlar e carbonio.
Sulla letteratura tecnica ho trovato scritto che il kevlar è usato per rinforzare gli spigoli, mentre il corpo è un mix di kevlar-carbonio.
Le aste sono realizzate da una fila di palloni, tra loro incollati, in Vektram TM e silicone (... anche le poli-immide rispondono bene).
Pannelli Fotovoltaici: nelle barche a vela e nell'automotive si sta provando di integrare i pannelli solari con la vela e/o con la carrozzeria.
Si propone il montaggio dei pannelli fotovoltaici in aderenza alla struttura pneumatica.
Le due semi-piramidi sono rinforzate con i tiranti.
Le due semi-piramidi sono incernierate sul nodo superiore e sono disaccoppiabili nei due + due nodi inferiori.
Per ragioni di stabilità, tutta l'elettronica, l'elettro-meccanica, la pneumatica e le batterie sono collocate in corrispondenza dei carter delle due + due ruote centrali.
Le ruote in totale sono quattro + quattro, di cui quattro motrici; la sterzatura avviene come sui cingolati, agendo sulle due + due ruote centrali.
FUNZIONAMENTO DELLO SPACE 2029
1 - atterraggio della navetta;
2 - Space 2029 si avvicina con le due semi-piramidi aperte;
3 - Space 2029 si sovrappone al carico da trasportare;
4 - le due semi-piramidi si chiudono;
5 - le due semi-piramidi si uniscono meccanicamente con un sistema di ganci automatici;
6 - il carico è sollevato con l'argano, montato alla punta della piramide;
7 - il carico è trasportato dalla rampa di lancio alla base lunare;
8 - arrivato alla base lunare, il carico viene poggiato sul terreno con l'argano;
9 - le due semi-piramidi si sganciano e si aprono;
10 - Space 2029 si allontana dal carico.
BIBLIOGRAFIA:
- Manuale di Elettrotecnica, Elettronica e Automazione - ed.Hoepli - Ortolani-Venturi;
- Manuale di Meccanica, Meccatronica ed Energetica - ed.Zanicchelli - autori vari;
- Scienza e Tecnologia dei Materiali - McGraw-Hill - Smith;
- Esercitazioni di Scienze delle Costruzioni 1 - Pitagora Editrice - Viola;
- NASA's Plan for Sustained Lunar Exploration and Development - Artemis - NASA;
- La rivincita di Icaro, Storia dell'Astronautica - Giunti-Nardini - Masini-Von Braun.
by Germano Pecoraro Designer - Italy
https://en.wikipedia.org/wiki/Space:_1999
https://www.youtube.com/watch?v=Y6BXaGEuqxo
PROBLEM SOLVING
FIRST PROBLEM:
the spaceships in the phases of landing and take-off project debris in all directions.
Solution: protect the pneumatic crane behind a shield, for example a rock (the photograph is only indicative).
ENG
SPACE 2029
I was inspired by a two-valve shell in a pyramid shape, which can be opened and closed in two half-pyramids.
The two half-pyramids are defined by five rods and four nodes. Each rod is structured by a row of balloons filled with inert gas (helium, nitrogen or other).
Theoretically, but it has to be proven, a pultrusion could be done with sintered Lunar dust.
The nodes are made of aeronautical composite material based on epoxy resin and a mix of kevlar and carbon.
In the technical literature I found written that kevlar is used to reinforce the edges, while the body is a mix of kevlar-carbon.
The rods are made from a row of flasks, glued together, in Vektram TM and silicone (... even the polyimides respond well).
Photovoltaic Arrays: in sailing boats and in the automotive sector, attempts are being made to integrate solar panels with the sail and / or bodywork.
It is proposed to mount the photovoltaic arrays in adherence to the pneumatic structure.
The two half-pyramids are reinforced with some rods.
The two half-pyramids are hinged on the upper node and can be decoupled in the two + two lower nodes.
For stability, all the electronics, electro-mechanics, pneumatics and batteries are located in correspondence with the carters of the two + two central wheels.
The wheels in total are four + four, of which four are driving; the steering takes place as on the tracked vehicles, acting on the two + two central wheels.
HOW THE SPACE 2029 WORKS
1 - the shuttle is landing;
2 - Space 2029 approaches with the two half-pyramids open;
3 - Space 2029 overlaps the load to be carried;
4 - the half-pyramids close;
5 - the two half-pyramids are mechanically joined with a automatic hooks system;
6 - the load is lifted with the winch, mounted at the tip of the pyramid;
7 - the cargo is carried from the launch pad to the moon base;
8 - arrived at the lunar base, the load is placed on the ground with the winch;
9 - the two unhook system and half-pyramids open;
10 - Space 2029 moves away from the cargo.
BIBLIOGRAPHY:
- Manuale di Elettrotecnica, Elettronica e Automazione - ed.Hoepli - Ortolani-Venturi;
- Manuale di Meccanica, Meccatronica ed Energetica - ed.Zanicchelli - autori vari;
- Scienza e Tecnologia dei Materiali - McGraw-Hill - Smith;
- Esercitazioni di Scienze delle Costruzioni 1 - Pitagora Editrice - Viola;
- NASA's Plan for Sustained Lunar Exploration and Development - Artemis - NASA;
- La rivincita di Icaro, Storia dell'Astronautica - Giunti-Nardini - Masini-Von Braun.
by Germano Pecoraro Designer - Italy
IT
For any translation mistakes, below the original text in Italian:
SPACE 2029
Ci si è ispirati ad una conchiglia bi-valve a forma di piramide, apribile e chiudibile in due semi-piramidi.
Le due semi-piramidi sono definite da cinque aste e quattro nodi. Ogni asta è strutturata da una fila di palloni pieni di gas inerte (elio, azoto o altro).
In teoria, ma è tutto da dimostrare, si potrebbe fare una pultrusione con polvere Lunare sinterizzata.
I nodi sono realizzati in materiale composito aeronautico a base di resina epossidica e un mix di kevlar e carbonio.
Sulla letteratura tecnica ho trovato scritto che il kevlar è usato per rinforzare gli spigoli, mentre il corpo è un mix di kevlar-carbonio.
Le aste sono realizzate da una fila di palloni, tra loro incollati, in Vektram TM e silicone (... anche le poli-immide rispondono bene).
Pannelli Fotovoltaici: nelle barche a vela e nell'automotive si sta provando di integrare i pannelli solari con la vela e/o con la carrozzeria.
Si propone il montaggio dei pannelli fotovoltaici in aderenza alla struttura pneumatica.
Le due semi-piramidi sono rinforzate con i tiranti.
Le due semi-piramidi sono incernierate sul nodo superiore e sono disaccoppiabili nei due + due nodi inferiori.
Per ragioni di stabilità, tutta l'elettronica, l'elettro-meccanica, la pneumatica e le batterie sono collocate in corrispondenza dei carter delle due + due ruote centrali.
Le ruote in totale sono quattro + quattro, di cui quattro motrici; la sterzatura avviene come sui cingolati, agendo sulle due + due ruote centrali.
FUNZIONAMENTO DELLO SPACE 2029
1 - atterraggio della navetta;
2 - Space 2029 si avvicina con le due semi-piramidi aperte;
3 - Space 2029 si sovrappone al carico da trasportare;
4 - le due semi-piramidi si chiudono;
5 - le due semi-piramidi si uniscono meccanicamente con un sistema di ganci automatici;
6 - il carico è sollevato con l'argano, montato alla punta della piramide;
7 - il carico è trasportato dalla rampa di lancio alla base lunare;
8 - arrivato alla base lunare, il carico viene poggiato sul terreno con l'argano;
9 - le due semi-piramidi si sganciano e si aprono;
10 - Space 2029 si allontana dal carico.
BIBLIOGRAFIA:
- Manuale di Elettrotecnica, Elettronica e Automazione - ed.Hoepli - Ortolani-Venturi;
- Manuale di Meccanica, Meccatronica ed Energetica - ed.Zanicchelli - autori vari;
- Scienza e Tecnologia dei Materiali - McGraw-Hill - Smith;
- Esercitazioni di Scienze delle Costruzioni 1 - Pitagora Editrice - Viola;
- NASA's Plan for Sustained Lunar Exploration and Development - Artemis - NASA;
- La rivincita di Icaro, Storia dell'Astronautica - Giunti-Nardini - Masini-Von Braun.
by Germano Pecoraro Designer - Italy
Similar models
3dwarehouse
free
![porte palatine](/t/9733010.jpg)
porte palatine
...e questo sito per catalogare le differenti tipologie di muratura romana e per lo studio della composizione architettonica romana.
3dwarehouse
free
![Porta Savonarola - Padova](/t/5450213.jpg)
Porta Savonarola - Padova
... piaz, le mura di padova, il poligrafo 2002, con integrazioni) #mura #padova #porta #rinascimento #savonarola #via_raggio_di_sole
3dwarehouse
free
![Chiesa Matrice. Duomo di Corato](/t/5810265.jpg)
Chiesa Matrice. Duomo di Corato
...no due cappelle absidate:. nella chiesa si custodiscono le reliquie e la statua in argento di san cataldo, protettore della città
3dwarehouse
free
![PalaEldo PalaBarbuto palazzetto dello Sport di Fuorigrotta](/t/10040827.jpg)
PalaEldo PalaBarbuto palazzetto dello Sport di Fuorigrotta
...nza di fondi. qualora il 'mario argento' fosse ricostruito, il palabarbuto dovrebbe poi essere probabilmente smantellato.
3dwarehouse
free
![Sacrario dei Caduti della Prima e della Seconda Guerra Mondiale](/t/5875247.jpg)
Sacrario dei Caduti della Prima e della Seconda Guerra Mondiale
...#sacrario_dei_caduti #seconda_guerra_mondiale #tempio_della_vittoria #unione_europea #world_war_i_memorial #world_war_ii_memorial
thingiverse
free
![GEEETech i3B: Underbody by Luca_Benedetto](/t/8906628.jpg)
GEEETech i3B: Underbody by Luca_Benedetto
...
ps: l'ultimo componente di quest'oggetto, il #16, è assolutamente identico al primo componente del catenamento y-plate.
3dwarehouse
free
![Piramidi d'Egitto](/t/9280862.jpg)
Piramidi d'Egitto
...gitto
3dwarehouse
le piramidi d'egitto(cheope,chefren e micerino) con accanto altre due piramidi fatte di blocchi di pietra.
3dwarehouse
free
![Casa Glazel - Piancogno](/t/6064072.jpg)
Casa Glazel - Piancogno
... sono il legno e le coperture a tetto semplice a padiglione. di proprietà privata la struttra è adibita ad abitazione e deposito.
thingiverse
free
![Arco di Costantino by Astraz](/t/9686572.jpg)
Arco di Costantino by Astraz
...r terminare il progetto sono stati impiegati 7 incontri da 2 ore e mezza ciascuno.
lavoro di: arcione, biasi, bocchetti, catalano
3dwarehouse
free
![torre degli Asinelli](/t/6245867.jpg)
torre degli Asinelli
...a torre garisenda e alla basilica di s. petronio, è il simbolo della città e mantiene ancora il suo primato di edificio più alto.
2029
3d_export
free
![Download free Shovel 3D Model](/t/49292.jpg)
Download free Shovel 3D Model
...3d model 3dexport shovel spade shovel 3d model urvinism 2029 ...
3d_export
$35
![medieval library furniture set model](/t/11389032.jpg)
medieval library furniture set model
...-tris: 830 (lod0),643(lod1),449(lod2). table -verts: 1077 (lod0),776(lod1),643(lod2). -edges: 2132 (lod0),2029lod1),1660(lod2). -faces: 1128 (lod0),1326(lod1),1088(lod2). -tris: 1864 (lod0),1334(lod1),1096(lod2). polycount books -verts:...
3d_export
$13
![medieval lab table 3d](/t/11389042.jpg)
medieval lab table 3d
...-color -roughness -ao polycount -verts: 1077 (lod0),776(lod1),643(lod2). -edges: 2132 (lod0),2029lod1),1660(lod2). -faces: 1128 (lod0),1326(lod1),1088(lod2). -tris: 1864 (lod0),1334(lod1),1096(lod2). file formats: -fbx(binary)...
3d_export
$20
![Terminator T-800 Skull](/t/11371922.jpg)
Terminator T-800 Skull
...turbosmooth iterations: 0 1 2 + for any questions...skype: skynet-2029 ...
3d_export
$50
![Terminator T-800 Torso Bust](/t/11371951.jpg)
Terminator T-800 Torso Bust
...turbosmooth iterations: 0 1 2 + for any questions...skype: skynet-2029 ...
3d_export
$250
![Terminator t-800 endoskeleton rekvizit](/t/11415926.jpg)
Terminator t-800 endoskeleton rekvizit
...turbosmooth iterations: 0 1 2 + for any questions...skype: skynet-2029 ...
3d_export
$89
![Collection of objects for the game of auto racing](/t/11373643.jpg)
Collection of objects for the game of auto racing
...01.(2304/3160) 02.(248/476) 03.(760/1341) 04.(39918/63779) 05.(2860/3056) 06.(1960/2858) 07.(1663/1760) 08.(2106/2876) 09.(1494/1969) 10.(1494/2029 11.(94/172) 12.(404/810) 13.(7690/9487) 14.(722/438) 15.(7845/10563) 16.(1343/2372) 17.(5297/8689) 18.(202/145) 19.(368/582)...
3d_export
$20
![terminator t-800 arm](/t/11402548.jpg)
terminator t-800 arm
...turbosmooth iterations: 0 1 2 + for any questions...skype: skynet-2029 ...
3d_export
$7
![Base Hair for Boy V41](/t/13049932.jpg)
Base Hair for Boy V41
...view in my profile.<br>features:<br>- verts : 963<br>- edges : 2029lt;br>- faces : 1068<br>- tris : 1922<br>- uvs : 1202<br>file...
turbosquid
$8
![Human-2029](/t/13402566.jpg)
Human-2029
...turbosquid
royalty free 3d model human-2029 for download as on turbosquid: 3d models for games, architecture, videos. (1175151)
Space
design_connected
$11
![Gravity Floor Lamp](/t/7933012.jpg)
Gravity Floor Lamp
...gravity floor lamp computer generated 3d model. designed by space ...
design_connected
$13
![Gravity Table Lamp](/t/7933014.jpg)
Gravity Table Lamp
...gravity table lamp computer generated 3d model. designed by space ...
design_connected
free
![Moon Lounge Table](/t/7933440.jpg)
Moon Lounge Table
...model of moon lounge table by gubi designed by space ...
3d_export
$5
![Futuristic Spacecraft 3D Model](/t/290316.jpg)
Futuristic Spacecraft 3D Model
...ort
futuristic space ship craft glider sci fi future robot science fiction
futuristic spacecraft 3d model vickicup 86106 3dexport
3d_export
$10
![Hllo Lounge Chairs 3D Model](/t/290363.jpg)
Hllo Lounge Chairs 3D Model
...lounge chairs 3d model 3dexport chair contemporary modern futuristic space saturn hello ring club lounge seat hllo lounge chairs...
3d_export
$25
![Space 3D Model](/t/290551.jpg)
Space 3D Model
...space 3d model
3dexport
современный большой диван
space 3d model lilabra20 60673 3dexport
3d_export
$50
![Antechamber 028 3D Model](/t/283416.jpg)
Antechamber 028 3D Model
...028 3d model 3dexport lobby waiting area hotel public space bar club ktv interior entrance hall antechamber vestibule entry...
3d_export
$50
![Antechamber 035 3D Model](/t/283438.jpg)
Antechamber 035 3D Model
...035 3d model 3dexport lobby waiting area hotel public space bar club ktv interior entrance hall antechamber vestibule entry...
3d_export
$42
![Vanguard III Satellite 3D Model](/t/283508.jpg)
Vanguard III Satellite 3D Model
...vanguard rocket navy satellite optical sensors weather relay transmitter space orbit vanguard iii satellite 3d model visualmotion 85062...
3d_export
$15
![Earth Moon Texture 3D Model](/t/296459.jpg)
Earth Moon Texture 3D Model
...3d model 3dexport earth moon planet world space science spacege age travel universe galaxy star sun meteor asteroid comet...