Thingiverse
Sovol SV01 Left BMG Extruder and E3D V6 direct conversion by macielle
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is my Sovol SV01 E3D V6 + BMG EXTRUDER (left) direct conversion setup: https://www.thingiverse.com/thing:4702681
Just bough the items listed below and used a 40x40 hotend fan. I kept the original SV01 blower for the fanduct.
Hotend:
24V TriangleLAB V6 Hotend pre-assambled unit for PRUSA i3 MK3 MK3S MK2/2.5
Link: https://www.aliexpress.com/item/32970283347.html?spm=a2g0s.9042311.0.0.259e4c4dCLBJPv
Left BMG Extruder:
trianglelab Left Mirror BMG extruder V1.0 Cloned Btech Bowden Extruder Dual Drive Extruder for 3d printer for mk8 cr10 ender3
Link: https://www.aliexpress.com/item/32993081695.html?spm=a2g0s.9042311.0.0.259e4c4dCLBJPv
I have used the SV01 original heater cartdrige (cutted and reconnect wires) or we need to buy a new one as the E3D V6 hotend kit it's too short (needs 1 meter).
PT100 V6 3950 1 METER
example link: Trianglelab NTC 100K ohm B3950 Thermistor Cartridge sensor High temperature 280℃ for E3D PT100 V6 Heater Block 3D printer.
Simple and fast conversion. This is my first conversion and it went good! The printer it's working great!
The fan duct is a remix from this: https://www.thingiverse.com/thing:4329777
The Hotend cooler I've downloaded from here: https://www.thingiverse.com/thing:4547109
Just bough the items listed below and used a 40x40 hotend fan. I kept the original SV01 blower for the fanduct.
Hotend:
24V TriangleLAB V6 Hotend pre-assambled unit for PRUSA i3 MK3 MK3S MK2/2.5
Link: https://www.aliexpress.com/item/32970283347.html?spm=a2g0s.9042311.0.0.259e4c4dCLBJPv
Left BMG Extruder:
trianglelab Left Mirror BMG extruder V1.0 Cloned Btech Bowden Extruder Dual Drive Extruder for 3d printer for mk8 cr10 ender3
Link: https://www.aliexpress.com/item/32993081695.html?spm=a2g0s.9042311.0.0.259e4c4dCLBJPv
I have used the SV01 original heater cartdrige (cutted and reconnect wires) or we need to buy a new one as the E3D V6 hotend kit it's too short (needs 1 meter).
PT100 V6 3950 1 METER
example link: Trianglelab NTC 100K ohm B3950 Thermistor Cartridge sensor High temperature 280℃ for E3D PT100 V6 Heater Block 3D printer.
Simple and fast conversion. This is my first conversion and it went good! The printer it's working great!
The fan duct is a remix from this: https://www.thingiverse.com/thing:4329777
The Hotend cooler I've downloaded from here: https://www.thingiverse.com/thing:4547109