Sovol Feet Spacer by C8forT

Last crawled date: 4 years ago

A spacer to to use with the stock Sovol feet to lift the printer up off the surface on which it sits by an additional 40mm, for a total height of 75mm between the bottom of the rails and the surface. Four spacers are needed, one for each foot. They are placed between the stock feet and the lower frame rails at the stock locations.
Dimensions: 33mm Diameter x 40mm Height
Screws required: Four M5 x 65mm - one for each foot.
I made them to provide room under the printer for trohn_javolta's Soval SV01 electronic case cover/lid for 120mm fans. https://www.thingiverse.com/thing:4097206