Thingiverse
Sopwith Camel RC v2
by Thingiverse
Last crawled date: 5 years, 3 months ago
Redesign ofhttps://www.thingiverse.com/thing:898956
See https://sopwithcamel3dmodel.wordpress.com/ for full assembly and print instructions.
Please be patient, this is still an on-going project.
NOTE! The .stl files are just to give something to look at in thingiverse. The actual stls to print are in the zip files.
Note there are Zip files, since individual .stl were getting a bit hard to handle in Thingiverse.
20191106 - Spiral and non-spiral versions of larger parts like WINGs (L and LI) and FUSElage (B and BI).
20191107 - Some example Cura Profiles in Cura.zip. Note my printer has a bowden tube so my retraction is set high.
20191109 - Refreshed all the Zip files.
20191115 - Full set of _1 (1/10) and _1.25 (1/8) scales. Im working on testing 1.25 for both printing and flight. The wings are now at pitch 0degrees.
See https://sopwithcamel3dmodel.wordpress.com/ for full assembly and print instructions.
Please be patient, this is still an on-going project.
NOTE! The .stl files are just to give something to look at in thingiverse. The actual stls to print are in the zip files.
Note there are Zip files, since individual .stl were getting a bit hard to handle in Thingiverse.
20191106 - Spiral and non-spiral versions of larger parts like WINGs (L and LI) and FUSElage (B and BI).
20191107 - Some example Cura Profiles in Cura.zip. Note my printer has a bowden tube so my retraction is set high.
20191109 - Refreshed all the Zip files.
20191115 - Full set of _1 (1/10) and _1.25 (1/8) scales. Im working on testing 1.25 for both printing and flight. The wings are now at pitch 0degrees.