Thingiverse
Soporte amortiguado micrófono by PaulDrones
by Thingiverse
Last crawled date: 4 years, 7 months ago
Hola a tod@s, este es un soporte en PETG para micrófonos con un poco de antivibración, el diámetro del clip es de 25,5mm y he añadido tres gruesos en TPU de 1, 1,5 y 2mm de grueso para adaptarlo a diferentes diámetros de micrófono, también podemos ajustarlo aplicando un poco de calor con un mechero (con cuidado de no pasarnos).
En la base del soporte tendremos 2 opciones para fijarlo:
1- Haremos una rosca con un macho de 1/4 whitworth
2- Simplemente hacemos un taladro de 6,5mm y usaremos una tuerca.
Hello everyone, this is a support made with PETG for microphones with a little anti-vibration, the diameter of the clip is 25.5mm and I have added three thicknesses in TPU of 1, 1.5 and 2mm thick to adapt it to different diameters of microphone, we can also adjust it by applying a little heat with a lighter (being careful not to overdo it).
At the base of the support we will have 2 options to attach it :
1- We will make a thread with a 1/4 whitworth male
2- We simply make a 6.5mm drill and we will use a nut.
En la base del soporte tendremos 2 opciones para fijarlo:
1- Haremos una rosca con un macho de 1/4 whitworth
2- Simplemente hacemos un taladro de 6,5mm y usaremos una tuerca.
Hello everyone, this is a support made with PETG for microphones with a little anti-vibration, the diameter of the clip is 25.5mm and I have added three thicknesses in TPU of 1, 1.5 and 2mm thick to adapt it to different diameters of microphone, we can also adjust it by applying a little heat with a lighter (being careful not to overdo it).
At the base of the support we will have 2 options to attach it :
1- We will make a thread with a 1/4 whitworth male
2- We simply make a 6.5mm drill and we will use a nut.