Thingiverse
Sony FX6 Rycote Lyre Mic Holder Adapter by jmone
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a Rycote Lyre adapter for the Sony FX6. Unscrew the stock FX6 Mic Holder, and using the same screws attach the printed files. You can now use Rycote Lyre Mic holders and with the thumb screws can quickly remove them if needed.
There are two versions, a "std" and a "long" version depending on your preference.
I printed these with ePA-CF for strength and that the material matches the body of the FX6. You will want to print at 0.20 as the tolerances are fairly tight.
The thread is from - https://www.thingiverse.com/thing:1460364
Edit 7 March : Made a couple of small changes for printability and to make it seat better.
There are two versions, a "std" and a "long" version depending on your preference.
I printed these with ePA-CF for strength and that the material matches the body of the FX6. You will want to print at 0.20 as the tolerances are fairly tight.
The thread is from - https://www.thingiverse.com/thing:1460364
Edit 7 March : Made a couple of small changes for printability and to make it seat better.