Sonoff Touch 2 Gang Adapter by Toddlawton

Last crawled date: 3 years ago

I received a Sonoff touch switch for Christmas. It was replacing a switch for our exterior lights, which was in a 2 gang box, with only 1 gang being used. I made an wall plate in Fusion 360 that rotates the Sonoff switch so that the lettering is right side up. The backing plate on the Sonoff bolts into this (I used 6-32x3/8" screws with a nylon acorn nut on the back to protect the wiring for this) This plate can then be screwed directly into the 4 holes in the 2-gang box, but you will need longer than standard face plate screws for these 4 locations. I reused some screws that i had around the house, and need to get some with white heads to match.