Thingiverse
Sonoff Pow R2 Enclosure with two sockets (Mennekes) by zeropage
by Thingiverse
Last crawled date: 4 years, 2 months ago
Disclaimer
If you print this model and use it, you do this on your own risk. I cannot be held responsible if someone or something gets damaged or injured by using this model. If you are not familiar with mains power don't even think about printing this model. Further reading with respect to dangers involved using the Sonoff Pow R2.
Summary
This enclosure for a Sonoff Pow R2 with two socket outlets was inspired by Cadm1um's modell "Sonoff POW Enclosure". This one here accommodates two mains sockets from the brand "Mennekes". The lid isn't screwed but press fit. I used a PG11 cable gland with a thread diameter of 18mm. In case you'd like to mount the enclosure there is a simple wall holder in the package.
If you print this model and use it, you do this on your own risk. I cannot be held responsible if someone or something gets damaged or injured by using this model. If you are not familiar with mains power don't even think about printing this model. Further reading with respect to dangers involved using the Sonoff Pow R2.
Summary
This enclosure for a Sonoff Pow R2 with two socket outlets was inspired by Cadm1um's modell "Sonoff POW Enclosure". This one here accommodates two mains sockets from the brand "Mennekes". The lid isn't screwed but press fit. I used a PG11 cable gland with a thread diameter of 18mm. In case you'd like to mount the enclosure there is a simple wall holder in the package.