Thingiverse
Sonicmodell AR 600 Mini Aerodynamic Bicam Kit by Mateyhv
by Thingiverse
Last crawled date: 3 years, 3 months ago
14/11/2020 EDIT. List of changes: 1- Reworked Nose section to avoid dark corners on Loris HD; 2- Added three Winter Operations air inlets for reduced cooling; 3- Added forgotten Cutting Stencil stl; 4- Added Printing Aid and picture for printing the Motor Firewall in Cura. 5- Added a few more pics. 6- Text and namings rearranged.
Complete aerodynamic kit for upgrading the Sonicmodel AR 600 Mini. The goal is to install the Caddx Loris 4K side by side with the Runcam Micro Eagle 2 for nice FPV and also to improve tail aerodynamics although the belly bump for example can be used standalone. The mod uses a stock foam nose which can also be bought separately, a quad 2205 motor (16x16mm screw hole distance on stand) plus 3x M2 screws and (optional) 8x 1mm insulating spacers, Everything else is 3D printed.
Weights are given in PLA/TPU although here is a list of some other materials:
PLA: rigid up to ~60ºC hard (in some cases easier to break), slightly heavier than the rest.
PETG: rigid up to ~80ºC, some degree of flexibility, slightly lighter than PLA.
ABS: rigid up to ~105ºC, hard, slightly lighter than the rest. Prone to warping.
TPU: flexible filament, for accessories and caps.
All parts are printed with 0,42mm wall line width.
Parts List
Nose uEagle2 Loris4K:
Extends the foam nose, keeps aerodynamic profile, moves cameras forward to maintain CG, improves cooling and reduces front cross section. Specifically for Runcam Micro Eagle and Caddx Loris 4K. Eliminates bullseye effect on both cameras.
Remove the center foam section by previously marking with the stencil (see Cutting Stencil bellow). Mount the cameras carefuly flexing the pilars to make them fit. Sometimes the pilar breaks so be prepared to print the nose section again. Test the cameras and only when fully ready apply a small amount of glue to the flat tabs and insert the assembly into the foam nose.
PETG good, ABS ok, PLA ok.
layer height: 0,15mm
walls/top/bottom: 2
infill: 16-20%
Rise printing temp 10ºC to improve layer adhesion for stronger and more flexible pilars.
Weight: 4,25gr
Nose uEagle2 Loris4K Cutting Aid:
Used as a stencil to mark the cutting line on the original foam nose. Place the side tabs just inside the foam rim and press so the foam gets marked. Cut the marked section with a very sharp blade and be conservative, you can always expand the hole later to fit the new nose with the cameras.
PLA, PETG and ABS are all OK.
Choose your preferred settings.
Loris Board Stands (Upper and Lower parts):
A couple of stands are fitted into the opposite sides of the board screw holes to maintain it stuck into the horizontal foam slot between the nose and the battery compartment. Insert the board diamond-like leaving the SD card and the REC button exposed. The big nose air inlets will keep good cooling.
ABS good, PETG and PLA ok. The board reaches 60ºC+ degrees on the ground although I haven't seen the PLA stand been affected so far.
layer height: 0,2mm
Weight (one couple): 0,15gr
Lens Cap Bicam:
For transport protection.
TPU (flexible) only
layer height: 0.2mm
walls: 2-3
top/bottom: 2-3
infill: ~80%
Lens Cap Loris only:
Protects only the 4K lens on landings when camera is not in use.
TPU (flexible) only
layer height: 0,2mm
walls: 2-3
top/bottom 2-3
infill ~80%
weight: 0,56gr
Belly Bump:
Used to streamline the finger bump on the lower fuselage. For printing position the flat side against the bed.
PETG, ABS, PLA are all ok.
layer height: 0,15mm
walls: 1
top: 1 / bottom: 2
infill: 0%
weight: 0,95gr
Motor Firewall:
Features full size ventilation port, wings trailing edge, 3 attachment points (2mm screw) for the tail cone.
Attach it to the wing with the original four screws. The holes might be slightly displaced due to manufacturing inconsistency, you can easily expand them with a hot rod aplied to the printed material. The tiny wings must be hollow to reduce weight. Can be done in Cura using modifiers and a square object, see part 5 ;-)
PLA, PETG and ABS are all good.
layer height: 0.15mm
walls/top/bottom: 2
infill: ~20%
wings infill: 0%
weight: 4,05gr
Motor Firewall Printing Aid:
To achieve the Motor Firewall with hollow wings in Cura use a pair of printing aid cubes (see pictures). Place them overlapping the wings and selecting Mesh Type menu (fifth icon on the left hand side toolbar) -> 'Modify settings for overlap'. Select 0% Infill. With the same method you can change other parameters if you wish.
Tail Cone versions A and B:
Enlarged streamline shape, internal ventilation ports for cooling.
Version A is intended for use with 8x 1mm heat insulating spacers for the motor screws so that heat transfer over the printed material is reduced. If you don't have anything suitable you can print version B wich keeps the same geometry without spacers.
PETG or ABS, flexibility and heat resistance are both intersting. I don't have problems using PLA with version A cone because I am mainly cruising and motor keeps cold.
layer height: 0,15mm
walls: 2
top/bottom: 2-3 (affects weight and mostly the hardness of the motor base stand)
infill: 35 - 50% (high numbers needed mostly for the flat motor base printing)
Weight: 7,35gr
Winter Operations Air Inlets:
For those who fly in cold weather reduced cooling air Nose flow will maintain battery warm for better performance and will also protect the inlets from snow/debris. Available in three sizes, Medium, Small and Closed.
-TPU (flexible) only
layer height:0,2mm
walls: 2
top/bottom 2
infill 20-50%
weight: Medium 0,47gr, Small 0,52gr, Closed: 0,51gr
AR Mini Keychain Badge:
If you have ended up at this point you definitely deserve the greatest AR Mini pilots keychain badge :-) Looks like its for Inav users. "AR Mini" text is stamped on the reverse. Print from whatever material you like with your preferred settings and if you want to up/downscale it just do it on the X and Y axis since Z will mess up with details.
layer height: 0,2mm
ENJOY!!!
Complete aerodynamic kit for upgrading the Sonicmodel AR 600 Mini. The goal is to install the Caddx Loris 4K side by side with the Runcam Micro Eagle 2 for nice FPV and also to improve tail aerodynamics although the belly bump for example can be used standalone. The mod uses a stock foam nose which can also be bought separately, a quad 2205 motor (16x16mm screw hole distance on stand) plus 3x M2 screws and (optional) 8x 1mm insulating spacers, Everything else is 3D printed.
Weights are given in PLA/TPU although here is a list of some other materials:
PLA: rigid up to ~60ºC hard (in some cases easier to break), slightly heavier than the rest.
PETG: rigid up to ~80ºC, some degree of flexibility, slightly lighter than PLA.
ABS: rigid up to ~105ºC, hard, slightly lighter than the rest. Prone to warping.
TPU: flexible filament, for accessories and caps.
All parts are printed with 0,42mm wall line width.
Parts List
Nose uEagle2 Loris4K:
Extends the foam nose, keeps aerodynamic profile, moves cameras forward to maintain CG, improves cooling and reduces front cross section. Specifically for Runcam Micro Eagle and Caddx Loris 4K. Eliminates bullseye effect on both cameras.
Remove the center foam section by previously marking with the stencil (see Cutting Stencil bellow). Mount the cameras carefuly flexing the pilars to make them fit. Sometimes the pilar breaks so be prepared to print the nose section again. Test the cameras and only when fully ready apply a small amount of glue to the flat tabs and insert the assembly into the foam nose.
PETG good, ABS ok, PLA ok.
layer height: 0,15mm
walls/top/bottom: 2
infill: 16-20%
Rise printing temp 10ºC to improve layer adhesion for stronger and more flexible pilars.
Weight: 4,25gr
Nose uEagle2 Loris4K Cutting Aid:
Used as a stencil to mark the cutting line on the original foam nose. Place the side tabs just inside the foam rim and press so the foam gets marked. Cut the marked section with a very sharp blade and be conservative, you can always expand the hole later to fit the new nose with the cameras.
PLA, PETG and ABS are all OK.
Choose your preferred settings.
Loris Board Stands (Upper and Lower parts):
A couple of stands are fitted into the opposite sides of the board screw holes to maintain it stuck into the horizontal foam slot between the nose and the battery compartment. Insert the board diamond-like leaving the SD card and the REC button exposed. The big nose air inlets will keep good cooling.
ABS good, PETG and PLA ok. The board reaches 60ºC+ degrees on the ground although I haven't seen the PLA stand been affected so far.
layer height: 0,2mm
Weight (one couple): 0,15gr
Lens Cap Bicam:
For transport protection.
TPU (flexible) only
layer height: 0.2mm
walls: 2-3
top/bottom: 2-3
infill: ~80%
Lens Cap Loris only:
Protects only the 4K lens on landings when camera is not in use.
TPU (flexible) only
layer height: 0,2mm
walls: 2-3
top/bottom 2-3
infill ~80%
weight: 0,56gr
Belly Bump:
Used to streamline the finger bump on the lower fuselage. For printing position the flat side against the bed.
PETG, ABS, PLA are all ok.
layer height: 0,15mm
walls: 1
top: 1 / bottom: 2
infill: 0%
weight: 0,95gr
Motor Firewall:
Features full size ventilation port, wings trailing edge, 3 attachment points (2mm screw) for the tail cone.
Attach it to the wing with the original four screws. The holes might be slightly displaced due to manufacturing inconsistency, you can easily expand them with a hot rod aplied to the printed material. The tiny wings must be hollow to reduce weight. Can be done in Cura using modifiers and a square object, see part 5 ;-)
PLA, PETG and ABS are all good.
layer height: 0.15mm
walls/top/bottom: 2
infill: ~20%
wings infill: 0%
weight: 4,05gr
Motor Firewall Printing Aid:
To achieve the Motor Firewall with hollow wings in Cura use a pair of printing aid cubes (see pictures). Place them overlapping the wings and selecting Mesh Type menu (fifth icon on the left hand side toolbar) -> 'Modify settings for overlap'. Select 0% Infill. With the same method you can change other parameters if you wish.
Tail Cone versions A and B:
Enlarged streamline shape, internal ventilation ports for cooling.
Version A is intended for use with 8x 1mm heat insulating spacers for the motor screws so that heat transfer over the printed material is reduced. If you don't have anything suitable you can print version B wich keeps the same geometry without spacers.
PETG or ABS, flexibility and heat resistance are both intersting. I don't have problems using PLA with version A cone because I am mainly cruising and motor keeps cold.
layer height: 0,15mm
walls: 2
top/bottom: 2-3 (affects weight and mostly the hardness of the motor base stand)
infill: 35 - 50% (high numbers needed mostly for the flat motor base printing)
Weight: 7,35gr
Winter Operations Air Inlets:
For those who fly in cold weather reduced cooling air Nose flow will maintain battery warm for better performance and will also protect the inlets from snow/debris. Available in three sizes, Medium, Small and Closed.
-TPU (flexible) only
layer height:0,2mm
walls: 2
top/bottom 2
infill 20-50%
weight: Medium 0,47gr, Small 0,52gr, Closed: 0,51gr
AR Mini Keychain Badge:
If you have ended up at this point you definitely deserve the greatest AR Mini pilots keychain badge :-) Looks like its for Inav users. "AR Mini" text is stamped on the reverse. Print from whatever material you like with your preferred settings and if you want to up/downscale it just do it on the X and Y axis since Z will mess up with details.
layer height: 0,2mm
ENJOY!!!
Similar models
thingiverse
free
Sonicmodell AR 600 Mini Bicam v2 by Mateyhv
...ransport protection of the lenses.coming soon
winter operations air inlets v2:
inlets for reduced airflow.coming soon
enjoy!!!
thingiverse
free
MicroMotorWarehouse AIO Cam Mounts by JerryBoi831
... abs or pla if you so choose.
printed at .2 layer height and 40% infill.
supports not needed but recommended if printing with tpu
thingiverse
free
Pliers FPV Motors
...a thin layer of contact glue like bostik or similar you need also a m3x8 mm screw and a...
thingiverse
free
Ar Wing Pro 2x21700 li-ion Nose by Fagge
...2 of these betteries in the nose and 4 in the compartment as a 6s configuration, with perfect cg balancing without extra weights.
thingiverse
free
FT (FliteTest) Swappable Firewall by tyob1
...ine with pla, but would be more durable using asa, petg, or abs.
material weight could also be a consideration (see notes below).
thingiverse
free
Fancy Mustache TPU ReMix by OiDepp
...very comfortable (for my nose!)
printing in a solid material like pla abs petg will be not so comfortable as the original i think
thingiverse
free
Nose Plugs by cseanard
...
2 perimeter walls for more flexible nose plugs
3 perimeter walls for stiffer nose plugs
fine sanding required to ensure comfort.
thingiverse
free
Mushroom Stamp by shutinhorror
...amp was printed in tpu at 4% infill with 2 bottom layers
both printed at .2 layer height and used super glue to hold stamp to top
thingiverse
free
Feet for Microsoft digital media pro keyboard by leogala
...pro keyboard by leogala
thingiverse
printed with 0.2 mm layers, at least 50% infill, supports. pla is ok, petg/abs even better.
thingiverse
free
soft cover for car jack by motor-fuzzi
...t try to use petg, pla or abs as it witll break.
soft enough to not scratch the car and strong enough to lift a middle sized car.
Bicam
sketchfab
$25
Bicame de Pedra - Aqueduto Quebra-Ossos
...rone geotecnologias - bicame de pedra - aqueduto quebra-ossos - buy royalty free 3d model by paulo rodrigo simões (@rollingdrone)
sketchfab
$25
Bicame de Pedra - Aqueduto Quebra-Ossos
...rone geotecnologias - bicame de pedra - aqueduto quebra-ossos - buy royalty free 3d model by paulo rodrigo simões (@rollingdrone)
thingiverse
free
Sonicmodell AR 600 Mini Bicam v2 by Mateyhv
...ransport protection of the lenses.coming soon
winter operations air inlets v2:
inlets for reduced airflow.coming soon
enjoy!!!
Mateyhv
thingiverse
free
Foxeer Pagoda streamlined fairing by Mateyhv
...t type: any
layer height: 0.2mm
layer thickness: 0.42mm
walls/top/bottom: 2/3/3 layers
infill: 25-35%
supports: yes
weight: 3.2gr
thingiverse
free
Armsoar Fury canopy retainer by Mateyhv
...ls/bottom/top: 2 layers (the piece will become solid)
infill: doesn't matter since its solid
weight: 0.75gr
enjoy the fury!!!
thingiverse
free
Armsoar Fury through calibration gauges by Mateyhv
...nge: at layer 6
for gauge_color_rudder.stl color changes are at layers:
1 black
6 white
8 yellow
9 red
11 black
enjoy the fury!!!
thingiverse
free
Sonicmodell AR 600 Mini Bicam v2 by Mateyhv
...ransport protection of the lenses.coming soon
winter operations air inlets v2:
inlets for reduced airflow.coming soon
enjoy!!!
Sonicmodell
thingiverse
free
Sonicmodell Binary servo
...sonicmodell binary servo
thingiverse
sonicmodell binary
thingiverse
free
Sonicmodell HD Motor Mount
...sonicmodell hd motor mount
thingiverse
motor mount for sonicmodell hd wing.
thingiverse
free
Sonicmodell Binary front gear
...sonicmodell binary front gear
thingiverse
sonicmodell binary front landing gear
thingiverse
free
Sonicmodell Binary
...tbs unify pro32 hv mmcx + luminier ax2 micro
caddx tarsier mount in the back
for the big holes with m3 you need ruthex m3 inserts
thingiverse
free
Sonicmodell binary
...sonicmodell binary
thingiverse
filling is minimal. the petg material. the magnet is rectangular with dimensions 5-10-1 mm.
thingiverse
free
Sonicmodell binary landing gear
...erse
this is the complete landing gear without the wheels for sonicmodell binary 1200mm.
i used a savox 0255 servo for steering.
thingiverse
free
sonicmodell binary 1200mm motor mount by TimonDV
...sonicmodell binary 1200mm motor mount by timondv
thingiverse
motor mount for sonicmodell binary 1200
thingiverse
free
RC Plane Landing Gear Sonicmodell Binary
...rc plane landing gear sonicmodell binary
thingiverse
landing gear for the sonicmodell binary 1200 mm
thingiverse
free
Sonicmodell Binary Matek F405-wing board
...sonicmodell binary matek f405-wing board
thingiverse
sonicmodell binary matek f405-wing board
thingiverse
free
Sonicmodell Binary servo bracket
...sonicmodell binary servo bracket
thingiverse
servo bracket
Aerodynamic
turbosquid
$5
Aerodynamic Rocking Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Spaceship aerodynamic transport
... 2 for download as 3ds, obj, wrl, x, fbx, blend, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1241237)
turbosquid
free
Spaceship aerodynamic fighter
... 3 for download as 3ds, obj, wrl, x, fbx, blend, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1241567)
3d_export
$5
Spoiler 3D Model
...spoiler 3d model 3dexport car spoiler sport parts aerodynamic fast speed spoiler 3d model misha13i 1745...
3d_export
$109
Citroen DS21 3D Model
...3d model 3dexport citroen classic modernist modern car vehicle aerodynamic style deesse ds streamliner citroen ds21 3d model dc888...
3d_export
$99
1947 Tatra T87 3D Model
...3dexport tatra t87 pre-war automobile oldtimer classic auto vintage aerodynamic ledwinka czechoslovakia retro streamline 1947 tatra t87 3d model...
3d_export
$99
Weber Sportscar 3D Model
...german fastest street race rim wheel led vray concept aerodynamic realistic swiss weber sportscar 3d model fabelar 10401...
3d_export
$99
Citroen SM 3D Model
...model 3dexport citroen sm classic modernist modern car vehicle aerodynamic style v6 maserati gt grand touring gran turismo coupe...
3d_export
$40
Auto Union Type C Streamline 3D Model
...union streamline 1930 37 avus autobahn rosemeyer racing classic aerodynamic speed record auto union type c streamline 3d model...
3d_export
$35
Chaparral 2J 3D Model
...american sports car speed grip innovative innovation odd shape aerodynamic lola racing exotic power chaparral 2j 3d model gonzo_3d...
600
turbosquid
$25
BMcK 600-600
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$60
F-600
...f-600
3dexport
f600 fire truck, f600 truck f-600 of 1968
design_connected
$11
Collage 600
...collage 600
designconnected
louis poulsen collage 600 pendant lights computer generated 3d model. designed by louise campbell.
turbosquid
$39
Nokia 600
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Origami 600
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
EURO 600
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
#600 - Klang
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$11
DS-600 Footstool
...ds-600 footstool
designconnected
de sede ds-600 footstool computer generated 3d model. designed by berger, ueli.
3d_export
$40
600 kw wind turbine
...600 kw wind turbine
3dexport
600 kw wind turbine
3ddd
$1
Paa Step 600
...paa step 600
3ddd
paa
paa step 600http://www.paa.lv/ru/produkciya/step-600
габариты: 600х500х120(h)
polys: 24387
Kit
turbosquid
$3
Bathroom Kit Baño kit
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Kit
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
Drift Kit
...drift kit
3dexport
turbosquid
$40
BitCoin Kit
...urbosquid
royalty free 3d model bitcoin kit for download as on turbosquid: 3d models for games, architecture, videos. (1519068)
turbosquid
$9
Industrial kit
...osquid
royalty free 3d model industrial kit for download as on turbosquid: 3d models for games, architecture, videos. (1144117)
turbosquid
$6
Kit Vases
...
turbosquid
royalty free 3d model kit vases for download as on turbosquid: 3d models for games, architecture, videos. (1285114)
turbosquid
free
Survival Kit
...rbosquid
royalty free 3d model survival kit for download as on turbosquid: 3d models for games, architecture, videos. (1637721)
turbosquid
$50
Ninja Kit
...rbosquid
royalty free 3d model ninja kit for download as fbx on turbosquid: 3d models for games, architecture, videos. (1672364)
turbosquid
$35
Brushes Kit
...osquid
royalty free 3d model brushes kit for download as max on turbosquid: 3d models for games, architecture, videos. (1216721)
turbosquid
$19
Kit Bedroom
...osquid
royalty free 3d model kit bedroom for download as max on turbosquid: 3d models for games, architecture, videos. (1290049)
Mini
turbosquid
$10
Mini Mini Luceplan
...
royalty free 3d model mini mini luceplan for download as max on turbosquid: 3d models for games, architecture, videos. (1227359)
3d_ocean
$39
Mini Cooper
...mini cooper
3docean
cabrioler cooper mini
mini cooper cabrioler
3d_export
$30
Mini lathe
...mini lathe
3dexport
mini lathe
3d_export
$5
mini mouse
...mini mouse
3dexport
mini mouse
3d_export
$5
mini house
...mini house
3dexport
mini house
3d_export
free
Mini Mecha
...mini mecha
3dexport
concept of mini mecha
3d_ocean
$20
Mini Gun
...mini gun
3docean
gatling gun gun machine gun mini gun weapon
model of a mini gatling gun.
3ddd
free
Herve mini
... кофейный , herve
http://www.mobiliavenanti.it/ru/products/hervè-mini
3d_export
$5
mini wall
...mini wall
3dexport
mini wall for living room
3d_export
$5
mini bank
...mini bank
3dexport
mini bank 3d model