Thingiverse
Somfy remote shade controller by bonnette
by Thingiverse
Last crawled date: 3 years, 5 months ago
There is a newer version of this thing here:https://www.thingiverse.com/thing:3714544
If you own a shade or awning or curtain controlled by a Somfy remote control, and would like to control it from anywhere in the world. This is the gadget for you.
It is a simple box with a servo that pushes the buttons. In my case it controls shades in my house. The heart is an Adafruit HAZZAH ESP8266 breakout board. https://www.adafruit.com/product/2471
This board allows you to use a web browser to control it.
The "pusher" is glued using 5 minute epoxy to the servo horn. It is powered with a 5 volt wall wart. The clip is used to hold the servo in. I use a clip because the servo needs to come out in order to put the "Somfy remote" into the unit. The HAZZAH is fastened to the box using double sided sticky tape.
Once built and running you will have to determine the ip address of the HAZZAH and then use a web browser to access the web page designed into the code that is embedded into the HAZZAH. This lets you test it by turning an LED on and off. If you want to use the unit outside of your local area. You will have to do port forwarding on your wireless router. I did the port forwarding and I am able to raise and lower my shades from anywhere in the world.
I have been using this for 2 years now.
If you own a shade or awning or curtain controlled by a Somfy remote control, and would like to control it from anywhere in the world. This is the gadget for you.
It is a simple box with a servo that pushes the buttons. In my case it controls shades in my house. The heart is an Adafruit HAZZAH ESP8266 breakout board. https://www.adafruit.com/product/2471
This board allows you to use a web browser to control it.
The "pusher" is glued using 5 minute epoxy to the servo horn. It is powered with a 5 volt wall wart. The clip is used to hold the servo in. I use a clip because the servo needs to come out in order to put the "Somfy remote" into the unit. The HAZZAH is fastened to the box using double sided sticky tape.
Once built and running you will have to determine the ip address of the HAZZAH and then use a web browser to access the web page designed into the code that is embedded into the HAZZAH. This lets you test it by turning an LED on and off. If you want to use the unit outside of your local area. You will have to do port forwarding on your wireless router. I did the port forwarding and I am able to raise and lower my shades from anywhere in the world.
I have been using this for 2 years now.
Similar models
thingiverse
free
Somfy Remote Holder Knob by Isaarer
...
thingiverse
this is a remix from https://www.thingiverse.com/thing:398515
you can use it to hang your somfy remote to the wall.
thingiverse
free
Somfy Battery Tube Clip by retrodad
...simple replacement. it's not fancy, but it works well, and you can print it in a color that's compatible with your decor.
thingiverse
free
G2S Servo Carriage Clip by wbrucem
...s2300 ; enable carriage latch (marlin firmware may offer similar servo features, you'll have to work that out for...
thingiverse
free
Ekobots - Camera Pan & Tilt by jsirgado
...gs like this.
buy my designs at pinshape:http://pinshape.com/users/27920-jsirgado
the openscad file is there, you can change all.
3dwarehouse
free
Box around Esp32, voltage converter and a 4 channel relay
...er flow to and from my hottub via internet using a normal web browser. allowing með to control this with my phone and a computer.
thingiverse
free
L298N Motor Controller Board Clip by matthewtmead
...board clips in), but this was too loose, so i reduced the width (at the point where the board clips in) to be approximately 42mm.
thingiverse
free
pcDuino Case by smartroad
...pletion and, if you are luck enough to have more than one printer, control multiple machine (although you'll need a usb hub).
thingiverse
free
Somfy Markisenfernbedienung by schubiegun
...end to use a raft for print and a upright positioning for print.
dimensions 30x76x100 and 20% infil came to about 40g in weight.
thingiverse
free
Somfy RemoteControl Hook
...somfy remotecontrol hook
thingiverse
this is a replacement for the somfy remote control hook
thingiverse
free
Tower Pro 9g servo switch by nahueltaibo
...f you make any donation to help me keep working on my designs, as a sign of appreciation, i'll send you the fusion 360 files.
Bonnette
thingiverse
free
Bonnette V16 by ledjo
...ette v16 by ledjo
thingiverse
bonnette œilleton carré
course de 15mm contre 13 pour v12
largeur +3mmhttps://youtu.be/wrkmyfphp2q
thingiverse
free
Bonnette V13 by ledjo
...de largeur en plus
3mm de longueur en moins
œilleton diamètre 8 contre 6.5 précédemment
course 10.5 contre 13
épaisseur inchangée
thingiverse
free
Bonnette smartphone by ledjo
...giverse.com/thing:2823116
en deux pièces, voir sens de montage
derniere version ultime: https://www.thingiverse.com/thing:2915272
thingiverse
free
Bonnette by ledjo
....com/thing:2907236
plus besoin de colle cyano
jamais deux sans trois, la version ultime:https://www.thingiverse.com/thing:2915272
thingiverse
free
Pac Man clock case by bonnette
... non-touch capable tft display.
details are on githubhttps://github.com/bonnette/pac_clock
orhttps://github.com/bonnette/dk_clock
thingiverse
free
Bonnette V14 by ledjo
...de plus en largeur
7mm de plus en longueur
oeilleton diamètre 7 contre 6.5mm auparavant
course 20 contre 13mm
épaisseur inchangée
thingiverse
free
Kit bonnette sans collages by ledjo
...la coque.
l'emploi de gants est fortement recommander lors de la manipulation, afin d'eviter toutes traces sur le reseau.
thingiverse
free
ProBreeze closet hanger by bonnette
...lament dry,i purchased a small probreeze desiccant dehumidifier.
i needed a way to secure it to the closet so i designed hangers.
thingiverse
free
Unite HotSpot container by bonnette
...his case to cover and secure a hotspot at our flying field in new waverly texas.
it was designed with freecad (thank you freecad)
thingiverse
free
LED holder for Holiday Lantern by bonnette
...igned it to use a tea light is very clever.
when i tried the tea light i found it to be too dim so i designed a replacement part.
Somfy
thingiverse
free
Somfy RemoteControl Hook
...somfy remotecontrol hook
thingiverse
this is a replacement for the somfy remote control hook
thingiverse
free
Anneau Keygo Somfy by Rimbouddavid
...anneau keygo somfy by rimbouddavid
thingiverse
anneau keygo somfy
thingiverse
free
Somfy ring by quent621
...somfy ring by quent621
thingiverse
somfy ring replacment for shutter motor. compatibility ilmo & oximo
diameter 50mm
thingiverse
free
Somfy freevia key by Namelessone
...somfy freevia key by namelessone
thingiverse
just somfy freevia key
thingiverse
free
SOMFY remote holder rotate
...somfy remote holder rotate
thingiverse
somfy rts remote holder
thingiverse
free
SOMFY remote holder rotate
...somfy remote holder rotate
thingiverse
somfy polargos 2 canal remote
thingiverse
free
Somfy Inis Uno INTEO
...somfy inis uno inteo
thingiverse
replacement fixation plate for somfy inis uno inteo
thingiverse
free
Somfy Schneider Adaptor by partejan
...somfy schneider adaptor by partejan
thingiverse
somfy smoove io adaptor for schneider elegance series.
thingiverse
free
Somfy remote wall mount by mimi012
...somfy remote wall mount by mimi012
thingiverse
this is a wall mount for a somfy shutter remote
thingiverse
free
Somfy One tablet support by frondot
...somfy one tablet support by frondot
thingiverse
a simple support for somfy one on 20mm tablet
Remote
archibase_planet
free
Remote
...remote
archibase planet
tv remote remote controller remote
remote - 3d model for interior 3d visualization.
archibase_planet
free
Remote
...e
archibase planet
remote control remote controller remote
remote n140512 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$1
Remote
...
turbosquid
royalty free 3d model remote for download as obj on turbosquid: 3d models for games, architecture, videos. (1487515)
3d_export
$5
Tv Remote
...tv remote
3dexport
tv remote
3d_ocean
$7
Remote controller
... control switcher tv remote
remote controller for tv, sound systems etc easy to edit textures photo real rendered with mental ray
turbosquid
$39
remote
...free 3d model remote for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1387531)
turbosquid
$5
remote
...free 3d model remote for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1401849)
archive3d
free
Remote 3D Model
...l
archive3d
tv remote remote controller remote
remote - 3d model for interior 3d visualization.
turbosquid
$11
Remote
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
remote
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Shade
design_connected
$16
Light Shade Shade 70
...ht shade shade 70
designconnected
moooi light shade shade 70 pendant lights computer generated 3d model. designed by jurgen bey.
design_connected
$13
Shade
...shade
designconnected
lema shade computer generated 3d model. designed by rota, francesco.
archibase_planet
free
Shade
...shade
archibase planet
peak visor canopy
shade - 3d model for interior 3d visualization.
archibase_planet
free
Shade
...shade
archibase planet
venetian blind jalousie
shade - 3d model for interior 3d visualization.
turbosquid
$5
Shade
...quid
royalty free 3d model shade for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1657665)
3d_ocean
$7
Lamp Shade
...lamp shade
3docean
interior lamb lamb shade room
lamp shade design for interior… vray; 1.2.6+
turbosquid
$1
Shade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Shade - Variant A
...shade - variant a
3dexport
shade model that can be used in hospitals and clinics.
design_connected
$7
Spindle shade
...spindle shade
designconnected
rothschild&bickers spindle shade computer generated 3d model.
design_connected
$13
Shaded Pendant
...shaded pendant
designconnected
another country shaded pendant computer generated 3d model. designed by workstead.
Controller
3d_ocean
$4
Controller TQFP32
...qfp32
3docean
chip controller cpu electronic gpu mcu micro controller silicon smd tqfp wafer
a micro controller in tqfp32 package
3d_ocean
$4
Controller TQFP44
...44
3docean
chip controller cpu electronic gpu mcu micro controller package smd tqfp tqfp44
a micro controller in a tqfp44 package
3d_export
$15
control unit
...control unit
3dexport
control unit
3ddd
$1
Yacht control
...yacht control
3ddd
yacht control
3d_export
$5
controle pgdm
...controle pgdm
3dexport
carcaca controle pgdm
turbosquid
free
controler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Control
...
http://www.schmitz-leuchten.de/html-ru/einzelleuchten-lampentyp-details.php?lamptype_no=700&group;=917&id;=731
3d_ocean
$4
Controller TQFP100
...100
3docean
chip computer cpu electronic gpu mcu micro controller pin platine silicon wafer
a micro controller in tqfp100 package
3d_ocean
$4
Controller TQFP64
...qfp64
3docean
chip computer cpu gpu mcu micro controller package silicon tqfp tqfp64 wafer
a micro controller in a tqfp64 package
3d_ocean
$7
Remote controller
... control switcher tv remote
remote controller for tv, sound systems etc easy to edit textures photo real rendered with mental ray