Thingiverse
Solo 8/12 Center Pulley (shortened) by DanoMaker
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a modeled center pulley for the leg of a Solo8/12. I didn't have the budget for machining, so I printed in PLA+ instead.
I've not tested IN a working Solo 8 yet, but the gear IN the legs seems sound so far. This is shortened from spec, because the bearings I chose were 1mm thicker each, so I shortened this by 2mm, which seems to allow the legs housing to be totally sealed.
I've not tested IN a working Solo 8 yet, but the gear IN the legs seems sound so far. This is shortened from spec, because the bearings I chose were 1mm thicker each, so I shortened this by 2mm, which seems to allow the legs housing to be totally sealed.