Thingiverse
Solidoodle 4 pi camera arm by onlydave
by Thingiverse
Last crawled date: 4 years, 1 month ago
Very simple camera arm I made up for my solidoodle 4. The actual camera holding bit is by thirdhorizon but you can basically glue or acetone weld whatever mount you likehttp://www.thingiverse.com/thing:404654
There are two stl files for the mount bit. One with 4mm holes (for 3m screws) and one that's flat for glueing. I found glue would eventually fail, one time pulling the pi with it, resulting in it getting unplugged and failing.
There are two stl files for the mount bit. One with 4mm holes (for 3m screws) and one that's flat for glueing. I found glue would eventually fail, one time pulling the pi with it, resulting in it getting unplugged and failing.