Solid Edge Skills Showcase: Malabar 30 Ton Tripod Jack 3d model
3dmdb logo
GrabCAD
Solid Edge Skills Showcase: Malabar 30 Ton Tripod Jack

Solid Edge Skills Showcase: Malabar 30 Ton Tripod Jack

by GrabCAD
Last crawled date: 1 year, 11 months ago
The Malabar 30 Ton Tripod Jack was modeled using the Part and Assembly environment in Solidedge

Specification:

Rated Capacity............. 30 tons (27.2 m. tons)
Side Load ...................... 15% of vertical load
Roll Under Height ............ 46.8 inches (1189 mm)
Low Height ......................... 46 inches (1168 mm)
Hydraulic Lift ...................... 38 inches (965 mm)
Extension Screw ................ 12 inches (305 mm)
Total Extended Height ..... 96 inches (2438 mm)
Oil Pressure at Rated Capacity ..3056 psig (215 kg/cm2)
Safety Pop-off Valve set at .... 33.0 tons (29.9 m. tons)
Proof Load ................................ 45.0 tons (40.8 m. tons)
Reservoir Capacity ...............3.4 Gallons (12.8 liters)
Hydraulic Fluid ................. MIL-PRF-5606 or equivalent
Approximate Jack Net Weight ................587 lbs (266 kg)

Reference material, http://www.malabar.com/pdf/product/tripod/sd8941A.pdf
Reference caster, http://www.mcmaster.com/#standard-casters/=12hxyn4

Modeled in Solidedge ST6
Rendered in Keyshot 5.0

Don't forget to hit "♥" button before you leave :)

Tags