Thingiverse
Solder fume extractor carbon filter
by Thingiverse
Last crawled date: 5 years, 4 months ago
In our R&D and prototyping work sometimes we have a lot of soldering. Every one who solders some PCBs for a few hours knows that the fumes are not the funniest part of this work especially if soldered with acid as a flux.
So there is a lot of easy to print and assemble designs of soldering fume extractors but:
most all designs are made with axial fans
there are only a few designs that have exhaust sleeve (improves mobility)
there are only a few designs with good absorber head
BOM
NOTE: you need to print the "sleeve_mount_bung.stl" twice
2x bolts and nuts M4x45mm
4x screws M3x10mm
one piece 10mm x 40-45mm aluminum tube
three pieces of aluminum tubes 10mm x 60mm if you print radial fan holder with legs, not with 2020 profile slider
1x radial fan model: PMB1297PYB1-AY (2).GN / params:12VDC; 97x94x33mm; 8.6W; 51.85m3/h; 3600RPM
1x brass nut for magic arm (for quick release plug)
1x 7inch magic arm
1x activated carbon fume filter from ebay or aliexpress
So there is a lot of easy to print and assemble designs of soldering fume extractors but:
most all designs are made with axial fans
there are only a few designs that have exhaust sleeve (improves mobility)
there are only a few designs with good absorber head
BOM
NOTE: you need to print the "sleeve_mount_bung.stl" twice
2x bolts and nuts M4x45mm
4x screws M3x10mm
one piece 10mm x 40-45mm aluminum tube
three pieces of aluminum tubes 10mm x 60mm if you print radial fan holder with legs, not with 2020 profile slider
1x radial fan model: PMB1297PYB1-AY (2).GN / params:12VDC; 97x94x33mm; 8.6W; 51.85m3/h; 3600RPM
1x brass nut for magic arm (for quick release plug)
1x 7inch magic arm
1x activated carbon fume filter from ebay or aliexpress