SOLAR TRACKER by ferhatdogus

Last crawled date: 3 years, 1 month ago

lIf you have made this thing, PLEASE take pictures and post! Thanks.
Hello. because I can not get to know the same language first. I know little about english language ... :) I have inspired this project from another user. I added circular supports because I could get the large horizontal gear out of the way and the centering of the horizontal gear was difficult because of the difficulty of centering the horizontal gear and it was a very clean image and the cable jam was not right ... and I made the small and simple circuit by myself to lift the breadboat but since the circuit size but I can load a universal circuit board if requested .. Arduino code in the file you download ..
We attach the ldr needles to the female jumper cables and you need to remove the clip first with the help of the needle as shown in the illustration to pass the jumper cables through the hole..
carefully attach the servo bed with medicated adhesive or japanese adhesive by carefully cutting the supplied piece to attach the horizontal servo.
the outer shell at the screw press must be 0 and the fill rate must be 100%.