Thingiverse
Soft Jaws for 4" Vice by BruceBach
by Thingiverse
Last crawled date: 4 years ago
This is a great idea and a very nice design. Thank you for this.
I used TPU at 70% infill instead of PLA and it works great.
Posted it as a make first but decided to post it as a remix due to the new magnet size.
Magnet inserts are 12.2mm x 2.2mm for 12 x 2mm magnets and the inner distance for the jaw is 4" for a 4" vice.
I used TPU at 70% infill instead of PLA and it works great.
Posted it as a make first but decided to post it as a remix due to the new magnet size.
Magnet inserts are 12.2mm x 2.2mm for 12 x 2mm magnets and the inner distance for the jaw is 4" for a 4" vice.