SodaStream-compatible Bottle Interface Reference Parts by Bluebie

Last crawled date: 3 years, 1 month ago

I've carefully measured and modelled the bottle interface used on regular plastic bottles supplied under the SodaStream brand of home carbonators. I've included a faithful recreation of the head of the SodaStream brand bottles in the file "SodaStream Plastic Bottle Interface (Universal)", with a small modification that adds a curve to the base. if you print it facing down, you can print without supports without any difficult overhangs!
I've also included a version called "Grabber Mount". This design is particularly useful with the more modern type of sodastream where you push the bottle in and then tilt it back to lock it in to place. If you don't normally screw your bottles in to your machine, this "grabber mount" recreates the profile of the little arms that reach around the rim of the bottle head and creates an extremely strong and firm mount, which holds any object very precisely and firmly in place with very good alignment, where the "Universal" screw type bottle interface is a little looser when inserted in to one of these machines. If you want really precise alignment at the cost of compatibility, use this one!
You can use these designs to connect just about anything to the output interface of a sodastream machine. You could make a very good PET bottle adaptor for example, just carve out the inside with whatever shape you need.