Thingiverse
Snorkel for 3dsets Rancher
by Thingiverse
Last crawled date: 5 years, 4 months ago
This is snorkel for Rancher model from 3dsets.com
Print instuctions: everything is printed as usual except snorkel_3.stl. This has to be printed with 0 top and 0 bottom layers, 2 perimeters and 30 % grid infill
Snorkel_1.stl, snorkel_2.stl and snorkel_3.stl are ment to be glued together.
Fender_stencil.stl is a stencil for drilling two holes into front right fender. Just place in onto the fender, mark position of the holes and then use 2mm drill.
You'll also need 2 screws M2x8mm
Print instuctions: everything is printed as usual except snorkel_3.stl. This has to be printed with 0 top and 0 bottom layers, 2 perimeters and 30 % grid infill
Snorkel_1.stl, snorkel_2.stl and snorkel_3.stl are ment to be glued together.
Fender_stencil.stl is a stencil for drilling two holes into front right fender. Just place in onto the fender, mark position of the holes and then use 2mm drill.
You'll also need 2 screws M2x8mm