Thingiverse
sno explorer, tracked rc vehicle
by Thingiverse
Last crawled date: 4 years, 3 months ago
this is a tracked rc vehicle that can be used outdoors. since the gearbox is not enclosed i would mostly use it when it does not rain.
remarks:
i have a lot of unused drone motors laying around, hence i made a gear mechanism for such motors. the gearing ratio is around 32 : 1, hence the motors should have sufficient torque.
the coil springs have an outer diameter of 10 mm and a wire diameter of 0.8 mm.
remarks:
i have a lot of unused drone motors laying around, hence i made a gear mechanism for such motors. the gearing ratio is around 32 : 1, hence the motors should have sufficient torque.
the coil springs have an outer diameter of 10 mm and a wire diameter of 0.8 mm.
Similar models
cg_trader
$5
110 mm rc edf | 3D
...c edf i printed and tested and it produced 4 lbs of thrust. it uses a motor with a diameter of 37 mm and a motor shaft of 5.5 mm.
thingiverse
free
worm gear 40:1 reduction ratio by normanbutchgrant
... ( hence the abs).
it has to be printed in high resolution as it is a proper gear design. i use nema 23 as the driving motor
thingiverse
free
Drone motor adapter for 1/10 RC by bakerw71
...f the motor then bolt the bell housing into the rc vehicle.
all holes are m3 (3mm diameter, i use m3 bolts to secure everything).
grabcad
free
37 mm DC Geared Motor Mounting Bracket
...dy with a 37 mm outer diameter.
the m3 mounting hole body center dimension for the 37 mm motor is 31 mm.
https://bit.ly/2gnivgw
grabcad
free
DT700KV RC brushless outrunner Bell motor M4 threaded shaft
...83 g
voltage: 2-3 s
suggested prop: 9" - 11"
application: multirotors or airplane with take-off weight 600-1200 grams.
thingiverse
free
RC gears for N20 motor by ka3ros
... spur gear" openscad library from janssen86.
one 12mm wide for the motor and one 16mm wide for the rope axle (4mm diameter).
thingiverse
free
Pinion Gear for Trojan Extruder by slipton
...t the hub diameter to be larger than the diameter of the toothed section. this will allow for easier mounting on the motor shaft.
thingiverse
free
RC Winch Mk2 by SILVERADORED
...ses m3 screws for the motor clamp. motor clamp will only fit in one orientation, if it isn't cooperating just turn it around.
thingiverse
free
Small Gear for 28BYJ-48 Stepper Motor
...rduino cheap stepper motor. driver board included. if you still need to buy the motor, use my link to support me - thank you!! :d
thingiverse
free
Micro metal gear motor housing by Roboteernat
...lock in the motor by heating the plastic and pressing it to firm around the motor.
i am using these on mine and they work fab :-)
Sno
turbosquid
$90
Tucker Sno-Cat
...e 3d model tucker sno-cat for download as sldas, ige, and obj on turbosquid: 3d models for games, architecture, videos. (1635504)
thingiverse
free
Sno*Jet Hood Vent by copperdog626
...se
i needed a hood vent for my 73' sno*jet star jet 433. the first picture is the new one and the second is the old one.
thingiverse
free
SNO-T Sextant index shade bracket by brettpim
... a shallow mark in the same place on top and bottom.
for more information about the sno-t sextant see william morris' website
thingiverse
free
Sno-Tek by Ariens Snowblower Skid Shoes
...be sure to measure your mounts if trying to use this in a different application or resize appropriately to adapt to other models.
thingiverse
free
SNO-T Sextant index shade bracket by brettpim
...om to mark where the notch is on the original piece.
for more information about the sno-t sextant see william morris' website
thingiverse
free
Improved Snoopy Sno Cone Machine Locking Cap by jsc
... as it uses a different mechanism. my design is a faithful reproduction of the original, but with the locking direction reversed.
thingiverse
free
snowflake 4
...snowflake 4
thingiverse
a flake of sno
thingiverse
free
Sno Brūm Ice Scraper Attachment by bmemike
...9;s handle and accommodate the special triangular-holed cap. you will need 3 zip ties to keep it permanently attached during use.
thingiverse
free
Snoopy Sno Cone Machine Replacement Locking Cap by CodeCreations
...3mm hole on the handle. stick a piece of filament through it to help keep the parts together securely and make it easier to turn.
Explorer
3ddd
$1
Space Explorer
... space explorer , манипулятор
3d манипулятор space explorer от 3d connexion
turbosquid
$3
Explorer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Shamray explorer
...shamray explorer
3ddd
гитара
модель гитары shamray explorer
3ddd
free
ESP Explorer
...esp explorer
3ddd
гитара
esp explorer
знаменитая гитарка дядьки хэта
3d_export
$129
explorer 2020
...explorer 2020
3dexport
turbosquid
$15
Hovercraft Explorer
...d
royalty free 3d model hovercraft explorer for download as on turbosquid: 3d models for games, architecture, videos. (1410554)
turbosquid
free
Robot Explorer
...
turbosquid
free 3d model robot explorer for download as fbx on turbosquid: 3d models for games, architecture, videos. (1574580)
turbosquid
$30
Explorer character
...
royalty free 3d model explorer character for download as ma on turbosquid: 3d models for games, architecture, videos. (1227012)
turbosquid
$50
explorer stuff
...alty free 3d model explorer stuff for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1428358)
turbosquid
$25
Exploring Boy
...exploring boy for download as obj, fbx, dae, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1291730)
Rc
3ddd
$1
RC Helicopter
...rc helicopter
3ddd
вертолет
mini rc helicopter
93.329 polys
3d_export
$7
rc helicopter model
...rc helicopter model
3dexport
rc helicopter model
3d_ocean
$25
RC F1
...rc f1
3docean
auto car control f1 formula race rc remote speed
remote control f1 car
turbosquid
$10
rc plane
...lane
turbosquid
free 3d model rc plane for download as blend on turbosquid: 3d models for games, architecture, videos. (1295828)
turbosquid
$100
RC Helicopter
...free 3d model rc helicopter for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1298511)
turbosquid
$59
Drone with RC
...3d model drone with rc for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1363601)
turbosquid
$75
RC buggy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
RC Plane001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
RC Jet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Rc airplane
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Tracked
design_connected
$11
Tracks
...tracks
designconnected
bonaldo tracks computer generated 3d model. designed by gilles, alain.
3d_export
$30
TRACK
...track
3dexport
turbosquid
$20
tracks
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Tracks
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Track
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Track
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$65
track
...track
3dexport
simple rendering of the scene file
3d_export
$65
track
...track
3dexport
simple rendering of the scene file
3d_export
$65
track
...track
3dexport
simple rendering of the scene file
3ddd
free
Стол Bonaldo Tracks
...onaldo , tracks , обеденный
стол bonaldo tracks
Vehicle
3d_export
$30
Vehicle display
...vehicle display
3dexport
vehicle display consists of podium and vehicle cover no vehicle there is a veiled vehicle silhouette
3d_ocean
$40
Heavy vehicles
...el this model is created with 3ds max 2009 and content .max (3ds max), size: 7,65 mb this model can be used in any scene. enjoy !
turbosquid
$41
vehicle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
vehicle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$6
Trailer Transporter Consignment Vehicle Turnover Vehicle
...trailer transporter consignment vehicle turnover vehicle
3dexport
trailer transporter consignment vehicle turnover vehicle
archive3d
free
Vehicle 3D Model
... sports and recreational vehicle n250714 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$50
Vehicle 3D Model
...vehicle 3d model
3dexport
vehicle
vehicle 3d model fred-13 21262 3dexport
3d_export
$15
special vehicles
...special vehicles
3dexport
3d_export
$10
utility vehicle
...utility vehicle
3dexport
turbosquid
$9
Vehicles pack
...bosquid
royalty free 3d model vehicles pack for download as on turbosquid: 3d models for games, architecture, videos. (1635451)