SnapMaker 2.0 Modified Power Supply Fan Housing by Xanoss07

Last crawled date: 5 years, 1 month ago

Fan shroud for SnapMaker 2.0 to replace the loud stock fan on the PSU. This mounts on the outside of the unit so a 20mm deep, 40mm diameter fan can be used. The notch in the side is how I ran power out for both the fan and to also power a Raspberry Pi running OctoPi (you will need a buck converter to step down to 5v for that. If only running a fan, you can find a quieter 24v fan).