Thingiverse
Snapmaker 2.0 filament guild (Work with the enclose) by 1D_Design
by Thingiverse
Last crawled date: 4 years, 8 months ago
(This is under revision due to several issues a newer version is on the way )
A simple filament guild for the Snapmaker 2.0 also works with the enclosed
Hardwear needed
M4 x 8mm (2X)
A simple filament guild for the Snapmaker 2.0 also works with the enclosed
Hardwear needed
M4 x 8mm (2X)