Thingiverse
Snapmaker 2.0 Filament guard for A350 enclosure by N0cktambuLL
by Thingiverse
Last crawled date: 4 years, 6 months ago
A filament guard made to prevent filament to go on the left side of Z axis linear rail when printer is in A350 enclosure.
Resolution doesn't matter, prints well from 0.24 to 0.32mm.
Infill 20-30%
No supports needed
Resolution doesn't matter, prints well from 0.24 to 0.32mm.
Infill 20-30%
No supports needed