Thingiverse
Snapmaker 2.0 Enclosure Touchscreen Bracket by kd7jur
by Thingiverse
Last crawled date: 4 years, 11 months ago
Designed this bracket to relocate the Snapmaker 2.0 A350 Touchscreen from inside of the Snapmaker Enclosure to Outside of the Snapmaker Enclosure.
Bracket is designed to be attached to the right side of the Enclosure, if you are using the long door as the front
Bracket is designed to be attached to the right side of the Enclosure, if you are using the long door as the front