Snapmaker 2.0 A350 Enclosure Filament Holder Internal Bracket by fastcompjason

Last crawled date: 4 years, 2 months ago

This is a simple design to allow for the internal mounting of the included Snapmaker 2.0 Filament holder bracket to be mounted inside the Enclosure. This allow for a clean external esthetic as well as it keeps the spool up out of the way tucked into normally unused space inside the enclosure. The offset design also allows for 2Kg spools to be used as it puts the spool rest in the center of the open area to allow for the larger spools. V1 doesn't have as many material saving holes (stronger) but the internal ridge may be slightly too deep and the bracket may rock slightly in the center ridge of the enclosure extruded frame. V2 has more holes (to save material), as well as I have shaved down the rear ridge and also elongated the main mounting holes to allow for a little bit of play when using the included M4 x 30mm bolts that come with the Snapmaker 2.0 A350. This design MAY work for the A250 enclosure, but I do not have that unit so I don't know.